User's Manual

12
1.4
●
Safety Precautions
1.4.1 Precautions Before Usage
CAUTION
The users (hospitals and clinics) hold responsibil-
ity for the usage and maintenance of this device.
Do not use this device unless you are a physician
or certifi ed person under law.
Perform the pre-operation check before using this
device, and confi rm that this device is operating nor-
mally.
When a problem occurs with this device, turn the
power off, attach an appropriate sign, such as
"malfunction", on this device, and contact Konica
Minolta technical representative.
This device is not explosion-proof, so do not use
any fl ammable or explosive gas near this device.
For the basic operation of the computer, display
monitor, and optional parts for this device, refer to
their operation manuals.
Please follow the rules and regulations of your
relevant authorities in the disposal of this product,
accessories, options, consumables, media and
their packing materials.
•
•
•
•
•
•
For EU member states only
This symbol means: Do not dispose of this
product together with your household waste!
Please refer to the information of your local
community or contact our dealers regarding
the proper handling of end-of-life electric and
electronic equipments.
Recycling of this product will help to conserve
natural resources and prevent potential negative
consequences for the environment and human
health caused by inappropriate waste handling.
1.4.2 Precautions for Usage
WARNING
Take note of the following when using this device:
Do not apply strong shocks or excessive loads
to the AeroDR detector by dropping it, etc.
For the load applied to the AeroDR detector,
do not exceed an overall load of 150kg or a
partial load of 100kg/80ij.
Do not dis assemble or modify this device.
Do not connect any devices that were not
purchased from Konica Minolta.
Do not turn the power switch OFF or pull out
the power cable while the system is operating.
Be careful not to drop the AeroDR detector
on any part of a person's body by catching
the AeroDR I/F Cable or AeroDR UF Cable
with your feet or similar.
The AeroDR I/F Cable and AeroDR UF Cable are
connected to the AeroDR detector using a magnet.
When moving the AeroDR detector, do not hold
onto the cable, and make sure to hold on the main
body. Also, do not grasp and pull the AeroDR de-
tector forcefully.
People with an implanted pacemaker or implanted
defi brillator may feel palpitation or dizziness.
If there is any smoke, odor, or abnormal sound, it
may cause a fire if use is continued, so immedi-
ately turn the power switch OFF, unplug the power
plug from the wall outlet, and contact Konica Mi-
nolta technical representative.
Take note of the following to reduce the risk of fi re,
electric shock, or electrical leakage:
Use specifi ed cables for the power cable, etc.
Use wall outlet with the correct rating as a
power source.
Connect the power plug to the wall outlet
properly without any slack.
Use power source with a ground wire.
If you do not plan to use this device for an ex-
tended period of time, unplug the power plug.
The supplied power cable is dedicated for
this device, so do not use it elsewhere.
Avoid exposure to liquid such as water.
Make sure that foreign material, such as
pieces of metal or wires, does not get inside.
Do not allow any metal or conductive objects
to come into contact with the AeroDR I/F
Cable connection port.
Do not handle the power plug with wet hands.
Do not let soil or dust accumulate on the power
plug, AeroDR I/F Cable, or AeroDR UF Cable.
Do not use extension cords.
Do not place many loads on one electrical outlet.
Do not damage the power cable, AeroDR I/F
Cable, or AeroDR UF Cable. Also, do not use
damaged cables.
Do not block the ventilating openings.
•






•
•
•
•














