User's Manual
55
Introduction
Digital radiography AeroDR SYSTEM (hereafter referred to as this device) performs X-ray imaging of the
human body using an X-ray planar detector that outputs a digital signal, which is then input into an image
processing device, and the image acquired with a digital image acquisition device is then transmitted to a
fi ling system, printer, image display device as diagnostic image data.
There are two types of X-ray planar detector for this device: the high-defi nition type AeroDR 1417HQ
(AeroDR P-11) and the standard type AeroDR 1417S (AeroDR P-12), and connection is made by either
wireless or wired connection. Diagnostic X-ray imaging of this device does not provide mammographic
images.
The console CS-7 (hereafter referred to as CS-7), which controls the receiving, processing, and output
of image data of this device, is required for operation. For the operation of the CS-7, refer to its operation
manual.
This operation manual provides instructions on the basic functions for operation of this device. Those op-
erating this device for the fi rst time should read this manual beforehand.
Also, store this manual close to this device after reading it through, so it can be used as a guide to allow
optimum operating conditions.
※
If the pages of the operation manual are smudged and illegible, replace with a new one. (There
is a fee for this service)
Application Specifi cation Regarding Usability
1) Principle of operation
• The X-ray planar detector reads the diagnostics X-ray digital image data from the X-ray image ex-
posed by the X-ray exposure device, and sends the image data to the CS-7.
2) Exposure subject patient groups
• All patients who can be exposed
3) Parts of body that can touch the X-ray planar detector
• Exposable entire skin surface
4) Profi le of intended operators
• Physicians, radiologists, nurses
• Healthy technicians of sound body who have specialized knowledge and a license.