User's Manual

60
ByregisteringtheAeroDRDetectorintheimageprocess-
ingcontrollerusingoneofthefollowingmethods,theAero-
DRDetectorcanbemovedbetweenexposurerooms.
• InsertitintotheAeroDRBatteryCharger/AeroDR
BatteryCharger2
• ConnecttheAeroDRI/FCableorAeroDRUFCable
tothewiredconnectionconnector
IMPORTANT
•••••••••••••••••••••••••••••••••••••
• AeroDR1012HQcannotberegisteredwiththeAero-
DRBatteryCharger.
• WhenusingImagePilotastheimageprocessingcon-
troller,itisnotpossibletomovetheAeroDRDetector
betweendifferentexposurerooms.
• Onceitisregisteredinanewexposureroom,itwill
notbeusableinthepreviousexposureroom.When
returningtoapreviousexposureroom,performthe
registrationoperationagain.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
341 Registration with AeroDR
Battery Charger
ToregistertheAeroDRDetectorintheAeroDRBattery
Charger,followtheprocedurebelow.
1
Make sure that all the devices in the destina-
tion exposure room are usable
2
Insert the AeroDR Detector into AeroDR Bat-
tery Charger in the destination exposure room
• Registrationprocesswillstart.
Exposure
side
3
Once the registration is completed, a
buzzer will sound on the AeroDR Battery
Charger, and the LED (green) will change
from slow ashing to lit
LED(green)
34 Registration and selection of the AeroDR Detector
4
Conrm that the AeroDR Detector icon is
displayed on the image processing con-
troller
IMPORTANT
•••••••••••••••••••••••••••••••••••••
• WhenanAeroDR Battery Chargerexclusivelyfor
chargeisused,conrmthatthebatterychargerinthe
destinationhasa"Chargeandregistration"label.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
HINT
•••••••••••••••••••••••••••••••••••••
• Chargingwillalsostart when theAeroDRDetector
isinsertedintotheAeroDRBatteryCharger,andthe
AeroDRBatteryChargerLED(blue)willlight.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
342 Registration with AeroDR
Battery Charger2
ToregistertheAeroDRDetectorintheAeroDRBattery
Charger2,followtheprocedurebelow.
1
Make sure that all the devices in the destina-
tion exposure room are usable
2
Insert the AeroDR Detector into AeroDR
Battery Charger2 in the destination expo-
sure room
• Registrationprocesswillstart.
Exposure
side