User's Manual
Table Of Contents
- Chapter 3 General Operations
- Chapter 4 Status (LED) Display
- Chapter 5 Troubleshooting
- Chapter 6 Maintenance
- Chapter 7 Specifications
- 7.1 Specifications
- 7.1.1 AeroDR Detector
- 7.1.2 AeroDR Interface Unit
- 7.1.3 AeroDR Interface Unit2
- 7.1.4 AeroDR Generator Interface Unit
- 7.1.5 AeroDR Battery Charger
- 7.1.6 AeroDR Battery Charger2
- 7.1.7 Access Point
- 7.1.8 AeroDR I/F Cable
- 7.1.9 AeroDR UF Cable
- 7.1.10 AeroDR XG Cable
- 7.1.11 AeroDR S-SRM Cable
- 7.1.12 General AeroDR SYSTEM
- 7.1 Specifications
51
Chapter 3
4
Push the S-SRM’s hand switch up to the
second level to perform exposure
• ExposureisperformedfromtheX-raydeviceto
produceX-rayimages.
• Whentheexposureiscompleted,imagesare
storedintheAeroDRDetectorandwillthenbe
convertedtodigitaldataandsenttotheimage
processingcontrollersequentially.
Secondstageswitch
5
Check that the exposed image is dis-
played on the image processing control-
ler
IMPORTANT
•••••••••••••••••••••••••••••••••••••
• TheAeroDR Detector isprecisionequipment, and
thereforeimpactorvibrationduringradiographyorim-
agetransfermayaffecttheimagequality.Becareful
whenhandlingtheAeroDRDetectorduringandjust
afterradiography.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
HINT
•••••••••••••••••••••••••••••••••••••
• IftheAeroDRDetectorremainsunusedforalongtime
(timecanbeset)ittransitionstothesleepmode.
• Whentheimageprocessingcontrollerisreadytoex-
pose,itrecoversfromthesleepmode.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
Reference
•••••••••••••••••••••••••••••••••••••
• Regardingtheoperationoftheimageprocessingcon-
troller,refertothe"OperationManual"oftheimage
processingcontroller.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
321 Exposure
Exposurewiththisdeviceisperformedwiththefollow-
ingprocedure.
Exposure under the basic connection ex-
ample
1
Perform examination registration with the
image processing controller
2
Check that this device is ready to expose
images, and then prepare for the expo-
sure
3
Push the exposure switch of the X-ray de-
vice to perform the exposure
• Whentheexposureiscompleted,imagesare
storedintheAeroDRDetectorandwillthenbe
convertedtodigitaldataandsenttotheimage
processingcontrollersequentially.
4
Check that the exposed image is dis-
played on the image processing control-
ler
Exposure under the S-SRM connection ex-
ample
1
Perform examination registration with the
image processing controller
2
Check that this device is ready to expose
images, and then prepare for the expo-
sure
3
Push the S-SRM’s hand switch to the rst
stage
• Theexposurepreparationsignalissenttothe
X-raydevice.
Firststageswitch
32 Operation of AeroDR Detector