211 User's Guide

Network printing

3-10 IC-206

3 Type in the administrator access code, and then press the [OK] key.

– The manufacturer’s default setting is “000000”.

– If the code was incorrectly entered, press the [Clear/Stop] key to

erase the number, and then type it in correctly.

4 Press the [,] or [+] key until “NETWORK SETTING” is selected, and

then press the [OK] key.

– If fax kit FK-506 is installed

5 In the “NETWORK SETTING” menu, press the [,] or [+] key until “IP

ADDRESS SETTING” is selected, and then press the [OK] key.