Copier User's Guide

5.9 Interrupting Copy Jobs

5-38 bizhub 180

Before Making Copies Chapter 5

5.9 Interrupting Copy Jobs

Long continuous copy operations can quickly be paused by pressing the [Interrupt]

key in order to copy a different document.

✎

Note

Some functions cannot be interrupted. In addition, some functions are not

available while a copy job is interrupted. For details, refer to “Function

Combination Table” on page 10-9.

If the document is placed on the Original glass and 2in1 or 4in1 copies are being

produced, the copy job cannot be interrupted.

To interrupt a copy job

1 Press the [Interrupt] key. The Interrupt

indicator lights up, and the current

copy operation is paused.

❍ When the [Interrupt] key is

pressed, all functions are reset to

their defaults.

2 Remove the current document, and then load the other document that you wish

to copy.

3 If necessary, specify any other copy settings.

❍ Paper (p. 5-22)

❍ Zoom (p. 5-30)

❍ Copy density (p. 5-36)

❍ Advanced Copy Operations (p. 6-1)

4 Using the 10-Key Pad, enter the desired number of copies, and then press the

[Start] key to copy the other document.