Copier User's Guide

6.1 Single-Sided Copies

bizhub 180 6-3

Advanced Copy Operations Chapter 6

4 Specify the desired copy settings.

For details, refer to “To make a simple copy” on page 3-2.

Do you know the copy order for the 4in1 copy function?

➜ The copy order can be set to one

of the two shown at the right. For

details, refer to “To set the “4IN1

COPY ORDER” function” on

page 7-52.

The default setting is PATTERN1.

5 Using the 10-key pad, enter the number of copies to be made.

❍ If multiple copies are to be printed, press the [Finishing] key until “Sort” is

selected.

6 Place the next document page on the

Original glass, and then press the

[Yes] key.

❍ Repeat this step for all pages of

the document.

❍ The number of document pages

that have been scanned is displayed.

7 After all document pages have been scanned, press the [Start] key.

✎

Note

If the document is placed on the Original glass and 2in1 or 4in1 copies are being

produced, the copy job cannot be interrupted.

PATTERN1 PATTERN2