Copier User's Guide

7.6 Specifying Copy Settings

7-40 bizhub 180

Utility Mode – Copy Functions Chapter 7

To set the “PAPER PRIORITY” function

1 Select the “COPY SETTING 1” menu.

❍ Refer to “To select the “COPY

SETTING 1” menu” on page 7-39.

2 Press the [1] key from the 10-Key Pad

to select “PAPER PRIORITY”.

3 Using the and keys, select a

paper size or paper tray, and then

press the [Yes] key.

❍ Select from the following paper

trays.

1st tray, 2nd tray, 3rd tray, 4th tray,

5th tray, Multi bypass tray

The “COPY SETTING 1” menu

appears again.

✎

Tip

If there are multiple paper drawers

loaded with paper of the same size

and type as that loaded into the paper drawer given priority with the “PAPER

PRIORITY” function, and if the paper in all of these paper drawers are used,

a message may appear indicating that paper be loaded into a paper drawer

that was not given priority.

In this case, load paper according to the message that appears.