Printer/Fax/Scanner/Copier User's Guide

8
8.4 Main Error Messages and Their Remedies
8-20 bizhub 180
Error Messages Chapter 8
MEMORY FULL The size of the data for the
scanned image has exceeded the
capacity of the memory.
Press any key, or turn the machine
off, then on again. (The scanned
data should be cleared from the
memory.)
(Flashing alternately)
PRESS ANY KEY
∗PC PRINT∗
MEMORY FULL
The image data received from the
computer has exceeded the
capacity of the memory.
Press any key, or turn the machine
off, then on again. (The received
image data should be cleared from
the memory.)
SET PLUG-IN COUNTER A counter key is not inserted. Insert the counter key.
UPPER TRAY FULL If the optional Job separator is
installed and the paper in the
Upper copy tray has reached the
maximum capacity, printing
cannot continue.
Remove all paper from the Upper
copy tray of the Job separator.
(Flashing alternately)
REMOVE PAPER
TRAY MOVEMENT
ERROR
The optional Job separator is
installed and the paper in either
the Upper copy tray or the Lower
copy tray has reached the
maximum capacity when the
machine is turned on, when
copying begins, or when starting to
print.
Remove the paper from the Upper
copy tray or the Lower copy tray of
the Job separator, and then press
any key.
(Flashing alternately)
PRESS ANY KEY
CALL SERVICE(M1) A maintenance is due. Contact your service representative.
CALL SERVICE(M2) The Imaging unit should be
replaced.
Contact your service representative.
MACHINE TROUBLE Some problem occurred in the
machine.
Turn the machine off, then on again.
If the error is still displayed, contact
your service representative.
(Flashing alternately)
(C####)
Message Cause Remedy