Copier User Manual

27
5. System Overview
1. Original Cover OC-502
Presses down on the loaded document to keep it in place.
2. Reverse Automatic Document Feeder DF-605
Automatically feeds one document sheet at a time for scanning,
and automatically turns over double-sided documents for
scanning if the document was set as double-side from the touch
panel.
3. Paper Feed Cabinet PC-102
The top tray can be loaded with up to 500 sheets of paper, and
the bottom tray can be used as storage.
4. Paper Feed Cabinet PC-202
Both the top and bottom trays can each be loaded with up to
500 sheets of paper.
5. Paper Feed Cabinet PC-402
Can be loaded with up to 2,500 sheets of paper.
6. DESK DK-501
Allows this machine to be set up on the floor.
7. Job Separator JS-502
Allows printed pages to be separated. Pull the lever when taking
out the paper.
8. Finisher FS-508
Feeds out printed pages. The “Sort” setting (separate by copy
set), “Group” setting (separate by page), Staple settings
(stapling), and Punch settings (hole punching) are available.
9. Output Tray OT-601
Copy output tray installed onto the finisher and used for
separating printed pages.
10. Saddle Stitcher SD-502
Installed onto the finisher to allow copies to be stapled or bound
at the center.
11. Mailbin Kit MT-501
Installed onto the finisher to divide printed pages and feed them
into the appropriate bin assigned to a specific individual or group
(only with PC printing).
Others
12. Punch Unit PU-501*
Installed onto the finisher to allow hole punching to be used.
13. Fax Kit FK-503*
Allows this machine to be used as a fax machine.
14. Scanner Unit SU-501*
Internal network scanner unit that allows the copier to be
used as a scanner configured into a computer network.
15. Hard Disk HD-504*
Increases the number of document pages to be scanned. In
addition, multiple jobs can be scanned.
16. Expanded Memory Unit EM-303/304/305*
By expanding the memory, the number of scanned pages
that can be stored in the memory can be increased.
17. Fax Multi Line ML-502*
Installed to increase the telephone lines available for faxing.
18. Dehumidifier Heater 1C*
Installed in the paper feed cabinet or desk to prevent humidity
from collecting in the paper.
19. Key Counter*
Allows the number of copies to be managed.
20. Key Counter Kit 4*
Required to install the key counter.
21. Key Counter Mounting Kit*
Required to install the key counter kit.
22. Local Interface Kit EK-502*
Used for making a local connection between this machine
and the computer.
23. Mounting Kit MK-709*
Installs the device to remotely control the machine. If the
fax kit is installed, this option is not needed.
24. Stamp Unit SP-501*
Used installed on the ADF. Stamps scanned document pages
to indicate that they have been faxed.
*The internal options are not shown.
Notes: The Finisher FS-508 and Job Separator JS-502 cannot be attached at
the same time.
The Mailbin Kit MT-501 and Saddle Stitcher SD-502 cannot be attached at
the same time.
11
7
9
10
8
6
5
4
3
12