Accessibility
Access
ABC DEF
JKLGHI MNO
TUVPQRS WXYZ
Interrupt
Reset
Copy
Fax/ScanExtra/Scan
Box
Mode Memory
Mode Check
Main Power
Stop
Power
Proof Copy
Star t
Utility/
Counter
Enlarge Display
Contrast
1. Open the bypass tray.
2. Load the paper onto the bypass tray (not higher than ,).
1. Position the original(s).
2. Type in the number of copies.
3. Press the START key.
STOP A COPY PROCESS
1. Press the STOP key.
1. Press the CLEAR key.
HOW TO USE THE MACHINE
PANEL
TOUCH SCREEN (Basic screen)
Short Guide 1/3
1. Pull out tray 1.
NOTE:
Do not touch the film located
at the right-hand end of the
tray.
CHANGE THE PAPER SELECTION (only for the bypass tray)
2. Load the paper into tray 1
(not higher than ,).
3. Align the trailing-edge guide
with the paper.
BASIC FUNCTIONS
MAKE A COPY
CLEAR A VALUE
LOAD PAPER IN TRAY 1
REFILL
Manages Black and White
RESET the
settings
Adjust contrast of
the touch screen
Save copy
settings
Change presettings of
the machine/
Check the machine’s counter
Input a value or
a number
CLEAR a
value
Check the
settings
Proof a
copy set
Confirm your
access data
TOUCH SCREEN
Open
Accessibility
settings
Switch to
Enlarge
display
mode
Interrupt a
copy job
START a
process
POWER
ON/OFF
STOP a
process
4. Press the START key.
3. Touch the desired paper selection.
Message display
Change to the functions
of the tab
Open Job list screen
Indication of free
memory
Number of copies
Save scanned data
in a registered User Box
Choose a FINISHING
function (Sort, group,
staple ...)
Choose function of
the BASICS tab
Scan originals of different
sizes
Change the mode
 
 

Summary of content (3 pages)

Don't see a manual you are looking for?