User's Manual

7
Using an LDAP server
7-6 200/250/350
Using an LDAP server Chapter 7
7.2 Registering destination information to one-touch dial
buttons
To register destination information to a one-touch dial button
If bit 7 of mode 466 is set to “1” in the Soft SW Setting screen, you must log
on with external server authentication before an LDAP search can be per-
formed.
1 Press the [Utility/Counter] key.
2 Touch [User Setting].
3 Touch [E-Mail Input].
– If the optional fax kit has been installed, touch [FAX].
4 Touch [One-Touch].
5 Select the one-touch dial button to be programmed.
6 On the LDAP Search screen, touch [ON], and then touch [Enter].
One-Touch
Search
Direct
Input
Quality&
Reduction
Menu
Job List
SCANReady
Fine
Chain
100%
IndexList
JPN US
Tokyo Osaka
Nagoya Fukuoka
Center
1
Center
2
Memory
Free
Select ON to activate One-Touch
Registration function for LDAP search
EnterCancel
Utility/Counter
LDAP Search
OFFON
100%
Memory
Free