User's Manual

8
Specifying settings using PageScope Web Connection
8-8 200/250/350
Specifying settings using PageScope Web Connection Chapter 8
Logging on to Administrator mode
You can switch between User mode and Administrator mode. However, in
order to specify system or network settings, you must be logged on to Ad-
ministrator mode.
0 When logged on to Administrator mode, the machine’s control panel is
locked and cannot be used.
0 Depending on the status of the machine, you may not be able to log on
to Administrator mode.
0 When logged on to Administrator mode, if no operation is performed for
10 minutes, a timeout occurs and you will automatically be logged off
from Administrator mode.
5 Message display If an error occurred in the machine, the status of
the malfunction/error and other error
information are displayed.
6 Device name The name of the device being accessed is dis-
played.
7 [Log-out] button This button appears after you have logged on
when user authentication or external server au-
thentication settings have been applied. Click
this button to log off.
8 Tabs Select the category of the page to be displayed.
The following tabs are displayed in User mode.
• System
•Job
•Print
• Scan
2
Note
If the optional fax kit has been in-
stalled, the Scan tab changes to the
Fax/Scan tab.
9 Menu Information and settings for the selected tab are
listed. The menu that appears differs depending
on the tab that is selected.
10 Information and settings Details of the item selected from the menu are
displayed.
No. Item Description