User's Manual

Specifying settings using PageScope Web Connection
8
200/250/350 8-33
Specifying settings using PageScope Web Connection Chapter 8
Changing the settings of the fax program
1 Click the Scan tab.
– If the optional fax kit has been installed, click the Fax/Scan tab.
2 Click [FAX Program Registration].
3 From the “Index” list, click the index that contains the fax program that
is to be changed.
The one-touch dial destinations saved in the selected index appear in
the lower half of the page.
4 Click the fax program that is to be changed.
– A one-touch dial destination other than a fax program cannot be se-
lected, even if it is clicked.
5 Specify settings for the program parameters.
– For details on the parameters, refer to “FAX Program Registration
(User mode)” on page 8-28.
6 Click [Apply].