User's Manual

8
Specifying settings using PageScope Web Connection
8-42 200/250/350
Specifying settings using PageScope Web Connection Chapter 8
8.7 TSI Registration
Text, such as a name, fax number, or address, can be registered so that it
can be printed at the top of pages sent with the Internet fax operation.
Transmission source names can be registered. Since multiple transmission
source names can be registered, a different transmission source name can
be used for different recipients or for different accounts. The registered
transmission source name can be changed by following the same procedure
used to register it.
To register transmission sources
1 In the Administrator mode, click the Scan tab.
– If the optional fax kit has been installed, click the Fax/Scan tab.
– For the procedure to log on to Administrator mode, refer to “Log-
ging on to Administrator mode” on page 8-8.
2 Click [TSI Registration].
3 Enter the transmission source name, and then click [Apply].
– Up to 8 transmission source names can be registered.
– Up to 40 characters can be entered.
4 Click [OK].