User's Manual

8
Specifying settings using PageScope Web Connection
8-52 200/250/350
Specifying settings using PageScope Web Connection Chapter 8
8.12 RX Document (Administrator mode)
The method for processing a received document can be specified. This can
be specified only for documents received over a network.
The following processing methods are available.
- Processing documents received on each line (Port): Specify the operation
performed, such as printing or forwarding the received document, for
each line where a document is received.
- Processing all other received documents (All Other Documents): Specify
the processing method of documents received on lines other than ports.
If “Port” is clicked, settings can be specified for the following.
If “All Other Documents” is clicked, settings can be specified for the follow-
ing.
Item Description
Distribution
Conditions
Select whether or not an operation is performed when a document is received
on the selected line.
Auto: Select this setting to not process the received document
Specifies: Select this setting to specify where the received document is saved
or forwarded.
RX Doc.
Settings
When “Distribution Conditions” is set to “Specified”, select the processing
method for the received document.
Forward: Select this setting to forward the data to the specified destination.
Print: Select this setting to print the document.
Print & Forward: Select this setting to print the document and forward the data
to the specified destination.
Forwarding
Destination
Specify a forwarding destination when “RX Doc. Settings” is set to “Forward”.
Click [Select Forwarding Destination], select the forwarding destination
address, and then click [Apply].
Item Description
RX Doc.
Settings
Select how the received document is processed.
Memory RX: Select this setting to save the document in the memory.
Forward: Select this setting to forward the data to the specified destination.
Print: Select this setting to print the document.
Print & Forward: Select this setting to print the document and forward the data
to the specified destination.
Forwarding
Destination
Specify a forwarding destination when “RX Doc. Settings” is set to “Forward”.
Click [Select Forwarding Destination], select the forwarding destination
address, and then click [Apply].