User's Manual

Specifying settings using PageScope Web Connection
8
200/250/350 8-53
Specifying settings using PageScope Web Connection Chapter 8
2
Note
If bit 7 of mode 306 is set to1 in the Soft SW Setting screen, onlyPort
is available. For details, refer to “Specifying software switch settings (ma-
chine functions)” on page 9-29.
Specifying the processing of received documents at each line
1 In the Administrator mode, click the Scan tab.
If the optional fax kit has been installed, click the Fax/Scan tab.
For the procedure to log on to Administrator mode, refer to “Log-
ging on to Administrator mode” on page 8-8.
2 Click [RX Document], then [Port].
3 Click [Network].