User's Manual

8
Specifying settings using PageScope Web Connection
8-62 200/250/350
Specifying settings using PageScope Web Connection Chapter 8
8.15 IP Filtering
Select whether or not reception is possible within the range of specified IP
addresses.
Settings can be specified for the following.
2
Note
0.0.0.0 cannot be included in a specified range. For example, to specify
the range of addresses before 192.168.1.20, specify the range from
0.0.0.1 to 192.168.1.20.
To specify IP filtering settings
1 In the Administrator mode, click the Scan tab.
– If the optional fax kit has been installed, click the Fax/Scan tab.
2 Click [IP Filtering].
Item Description
Accept IP
Range
Reception of only the IP addresses in the specified range is permitted.
Reject IP
Range
IP addresses in the specified range are blocked.