User's Manual

Specifying settings using PageScope Web Connection

8-66 200/250/350

Specifying settings using PageScope Web Connection Chapter 8

Note

If bit 7 of mode 466 is set to “1” in the Soft SW Setting screen, select

“GSS-SPNEGO” beside “Authentication Setting”. For details on the soft-

ware switch settings, refer to “Specifying software switch settings (ma-

chine functions)” on page 9-29.

If bit 7 of mode 466 is set to “1” in the Soft SW Setting screen, the infor-

mation entered beside “Login Name” and “Password” is used when

checking the connection. For details on the software switch settings, re-

fer to “Specifying software switch settings (machine functions)” on

page 9-29.

Registering an LDAP server

1 In the Administrator mode, click the Network tab.

– For the procedure to log on to Administrator mode, refer to “Log-

ging on to Administrator mode” on page 8-8.

2 Click [Common Setting], then [LDAP Server Setting].

3 Click a box containing “---” for the LDAP server to be registered.