User's Manual

Specifying settings using PageScope Web Connection
8
200/250/350 8-69
Specifying settings using PageScope Web Connection Chapter 8
8.18 E-Mail/Internet FAX (Administrator mode)
Transmission settings for the Scan to E-Mail and Internet fax operations can
be specified.
Settings can be specified for the following.
Specify settings for the following.
POP3
* If the setting of a parameter marked with [*] is changed, turn this machine off, then on again.
Item Description
POP3 Specify the POP3 server for sending Internet faxes.
SMTP Specify the SMTP server for sending data with the Scan to E-Mail operation.
Subject/Text Specify the subject and any text to be used when sending data with the Scan
to E-Mail or Internet fax operation.
Other Specify all other related send and receive settings.
Item Description
POP3 Server
Address
Specify the settings required to receive Internet faxes.
Type in the IP address or host name (up to 64 characters).
For details on the settings to be specified, contact the network administrator.
POP3 User
Name
Specify the POP3 user name (up to 64 characters) of this machine.
For details on the settings to be specified, contact the network administrator.
POP3
Password
Specify the POP3 password (up to 32 characters) of this machine.
For details on the settings to be specified, contact the network administrator.
2
Note
The entered password appears as “••••”. To correct the en-
tered password, clear “••••”, and then type in the correct pass-
word.
Auto-RX Check Select whether to automatically check for received e-mail messages (Internet
fax) when connected to the POP3 server.
Auto-RX Check
Interval
If “Auto-RX Check” is set to “Yes”, type in the time interval (between 1 and 99)
at which the check is performed.
Port Number Type in the number (between 1 and 65535) of the port where the POP3 server
is connected.
POP3 Timeout
[*]
Select the time until the connection with the POP3 server is timed out. Select
from 30, 60, 90, 120, 150, 180, 210, 240, 270, and 300 seconds.
APOP [*] Select whether or not APOP authentication is enabled.