User's Manual

Specifying settings using PageScope Web Connection
8
200/250/350 8-89
Specifying settings using PageScope Web Connection Chapter 8
8.22 User Authentication (Administrator mode)
This page appears when “External Server” is specified as the authentication
method. The user authentication server type and domain name can be spec-
ified.
If “User Authentication” is clicked, settings can be specified for the following.
2
Note
If user authentication is performed and a domain other than the default
domain name is used as an Active Directory, type in the user name as
“user_name@domain_name”.
For “user_name@domain_name”, specify a domain name of up to 64
characters.
If bit 7 of mode 466 is set to “1” in the Soft SW Setting screen, select “Ac-
tive Directory”. For details on the software switch settings, refer to “Spec-
ifying software switch settings (machine functions)” on page 9-29.
Item Description
Active
Directory
Type in a domain name of up to 64 characters for the Active Directory. Ten
domain names can be registered. Specify the default domain name in the
“Default Domain Setting” box.
NTLM Type in the domain name for the NT server. Up to 15 characters can be
entered.
NDS: Tree
Name
Type in the NDS tree name. Up to 63 characters can be entered.
NDS: Context
Name
Type in the NDS context name. Up to 127 characters can be entered.