User's Manual

2
Setup
2-10 200/250/350
Setup Chapter 2
3 To use the DHCP server, touch [Auto-Obtain]. To use a fixed IP ad-
dress, touch [IP Input].
– When [IP Input] was selected, specify the settings for “IP Address
Setting” and “Subnet Mask”.
4 Touch [Enter].
IP Address Setting
Specify a setting when “DHCP” is set to “IP Input”.
1 In the Network Setting screen, touch [Basic Settings].
2 Touch [IP Address Setting].
This unit is DHCP compatible.Input
IP address when DHCP is not required.
Utility/Counter
DHCP
EnterCancel
IP InputAuto-Obtain
100%
Memory
Free
Basic Settings
EnterCancel
DHCP
IP Addres Setting
Subnet Mask
Gateway
IP Input
Self-Domain Name
Network Board Set
Auto
. . .
. . .
. . .
100%
Memory
Free