User's Manual

Setup

200/250/350 2-13

Setup Chapter 2

3 Use the keypad to type in the IP address.

– You cannot specify an IP address that begins with 0, 127, or 224 or

higher.

– When less than three digits are entered, use [→] to move the cursor

to the next number.

4 Touch [Enter].

Network Board Set

Settings can be specified for the following.

Item Description

Auto Selects the transmission speed automatically by auto-negotia-

tion.

100M-Full Manually specifies a transmission speed of 100 Mbps in full-du-

plex mode when the transmission speed cannot be selected au-

tomatically.

100M-Half Manually specifies a transmission speed of 100 Mbps in half-

duplex mode when the transmission speed cannot be selected

automatically.

10M-Full Manually specifies a transmission speed of 10 Mbps in full-du-

plex mode when the transmission speed cannot be selected au-

tomatically.

10M-Half Manually specifies a transmission speed of 10 Mbps in half-du-

plex mode when the transmission speed cannot be selected au-

tomatically.