Instruction Manual

How to Use the Authentication Unit
3
AU-211P 43
3.5.3 Encrypting an E-Mail and Adding a Digital Signature
Display the Fax/Scan screen on the MFP control panel, and tap [Application].
- To encrypt an e-mail, set [E-Mail Encryption] to [ON].
- If [Select when sending] is selected to add a digital signature, set
[Digital Signature] to [ON]. If [Always add signature] is selected, a
digital signature will be automatically added.
!
Detail
• When setting to enable encryption or to add a digital signature, you can
specify up to 10 E-mail addresses to be broadcasted.
• When setting to enable encryption or to add a digital signature after 11 or
more E-mail addresses have already been specified, you need to cancel
all the specified addresses once and reselect them.
• When the encryption is set after specifying the E-mail addresses (up to
10 E-mail addresses), specified E-mail addresses that do not have a
registered certificate will be canceled.
• For details on how to send an e-mail, refer to the User's Guide [Scan]
supplied together with the MFP.
• For details on how to register the certificate in the e-mail address, refer
to the User's Guide [Web Management Tool] supplied together with the
MFP.
• When adding a digital signature with a PIV card, enter the PIN code when
sending an e-mail. If the PIV card is locked as a result of an incorrectly
entered PIN code, the e-mail sending job will be discarded.