Instruction Manual

[Print Functions] 3-4

3.1 Preparation for printing (Bonjour connection)

3 Copy the driver file onto the desktop according to the Mac OS X version.

% Mac OS X 10.3: model name of this machine_103104.pkg

% Mac OS X 10.4: model name of this machine_103104.pkg

% Mac OS X 10.5: model name of this machine_105.pkg

% Mac OS X 10.6: model name of this machine_106.pkg

% Mac OS X 10.7: model name of this machine_106.pkg

% Mac OS X 10.8: model name of this machine_106.pkg

% Mac OS X 10.9: Model name of this machine_106.pkg

% In Mac OS X 10.5 or later, the driver folder varies depending on the paper size. Select the appropri-

ate folder to suit your environment.

To mainly use the metric-based paper size such as A4 size: "WW_A4" folder

To mainly use the inch-based paper size such as letter size or 8 1/2 e 11: "WW_Letter" folder

4 Double-click the file copied onto the desktop.

The printer driver installer starts.

5 Click [Continue] following the instructions on the pages that follow until the [Install] page appears.

% When the name and password prompt appears during the procedure, enter the administrator name

and password.

6 Click [Install].

The printer driver is installed on the computer.

7 Click [Close].

Installation of the printer driver is then completed. Then, add the printer to the computer.

Configuring connection using Bonjour (Mac OS X 10.4 or later)

Add the printer automatically detected by Bonjour to the computer.

1 Select [System Preferences...] in the Apple menu.

2 Click the [Print & Fax] icon.

% In Mac OS X 10.7/10.8, click the [Print & Scan] icon. In Mac OS X 10.9, click the [Printer & Scanner]

icon.

3 Click [+] in the lower left of the screen.

% In Mac OS X 10.4/10.5/10.6, go to Step 4.

% In Mac OS X 10.7/10.8/10.9, if a target printer name is found in the list displayed by clicking [+], se-

lect it. When a printer driver is selected automatically, the printer addition is completed. If a target

printer name is not found, select [Add Other Printer or Scanner...] or [Add Printer or Scanner...], and

go to Step 4.

4 Click [Default].

Connected printers are detected.

% If no printers are detected, restart this machine.