Instruction Manual

bizhub 42/36 5-127

5.7 [Network] tab

5.7.8 [SNMP Settings]

Configure the settings for SNMP function.

Select [Network] ö [SNMP Settings] ö [SNMP Settings].

Item Description Control Panel

[SNMP] If [Enable] is selected, SNMP is enabled. page 4-10

[SNMP v1/v2c(IP)] If [Enable] is selected, SNMPv1/v2c (IP) is ena-

bled.

[SNMP v3(IP)] If [Enable] is selected, SNMPv3 (IP) is enabled.

[SNMP v1(IPX)] If [Enable] is selected, SNMPv1 (IPX) is enabled.

[UDP Port] Enter a UDP port number.

The currently used port number cannot be speci-

fied.

[SNMP v1/v2c Settings] Configure the settings for SNMP v1/v2c.

[Read Community Name] Enter a community name used for reading (up to

15 characters, excluding " ' # \ and space).

[Write] If [Enable] is selected, the Write function is ena-

bled.

[Write Community Name] Enter a community name used for reading and

writing (up to 15 characters, excluding " ' # \ and

space).

[SNMP v3 Settings] Configure the settings for SNMP v3.