Instruction Manual

bizhub 42/36 4-26

4.9 [Print Settings]

4.9.6 [Emulation]

Configure default of printer languages and fonts.

% Press the Utility/Counter key ö [Admin Settings] ö [Print Settings] ö [Emulation].

Settings

[Default Emulation] Select the machine emulation language.

If [Auto] is selected, the machine automatically selects the machine emu-

lation language from the data stream.

[PS] [Wait Timeout] Specify the time until an error is determined to be

a PostScript error.

If [0] is selected, no timeout is performed.

[Print PS Errors] Select whether or not an error page is printed

when a Postscript error occurs.

[PS Protocol] Select the protocol for data transmissions with a

PostScript data stream.

If [Auto] is selected, the machine automatically

selects an applicable protocol from the data

stream.

[PCL] [CR/LF Mapping] Select the definitions of the CR/LF codes in the

PCL language.

[Line/Page] Specify the number of lines per page in the PCL

language.

[Font Setting] • [Font Number]: Specify the default font in the

PCL language. The font numbers that appear

correspond to the PCL font list.

• [Pitch Size]: Specify the font size in the PCL

language. If the setting selected for [Font

Number] is for a bitmap font, [Pitch Size] ap-

pears. If the setting selected for [Font

Number] is for an outline font, [Point Size] ap-

pears.

• [Symbol Set]: Specify the symbol set used

with the PCL language.

[XPS] [Digital Signature] Select whether or not to enable XPS digital signa-

tures.

[Print XPS Errors] Select whether or not an error report is printed af-

ter an XPS error has occurred.

Factory default

[Default Emulation] [Auto]

[Wait Timeout] [0]

[Print PS Errors] [OFF]

[PS Protocol] [Auto]

[CR/LF Mapping] [CR=CR LF=LF]