User Manual

11
Utility Mode
11-18 bizhub 500/420
Utility Mode Chapter 11
11.6 Entering Power Save Mode (Fax)
Set the Entering Power Save Mode (Fax).
*
indicates factory default setting.
Entering Power Save Mode (Fax)
1 Open the Administrator Setting screen (See “Entering Administrator
Setting” on page 11-3).
2 Press [System Setting].
– Some items may not be displayed depending on the optional set-
tings.
– In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [System
Setting], enter 1 through the numeric keypad.
3 Press [Power Save Setting].
Item Description Available value
Entering Power
Save Mode
(Fax)
If the [Immediately] have been selected and
it is power save mode when input signals
come, then power save mode will be re-
sumed after completion of reception.
Normal
*
/ Immediately