User Manual

Explanation of Reports and Lists
12
bizhub 500/420 12-9
Explanation of Reports and Lists Chapter 12
12.4 Polling TX Report
This report is printed out automatically following polling transmission of a
document registered for the Polling TX User Box.
Automatic printout can be set to [ON] or [OFF] with [TX Report] at [Report
Settings] of Utility Mode. For details, see “Report Settings” on page 11-53.
*
The actual reports may be different from the reports in this manual.
Destination Any of the following is shown.
• A destination name is shown when it is registered in the Address
Book list.
• Destination telephone number
Start Time The communication start time is shown.
Time Time required for a communication is shown
Prints No. of pages which has been sent is shown.
Result: OK Shown when communication ended normally.
S-OK Shown when communication was stopped.
PW-OFF Shown when the power switch is turned off.
TEL Shown when there has been an incoming tele-
phone call.
NG Shown when a communication error has oc-
curred.
Cont Shown when an error has occurred and the FK-
502 has switched to error page redialing.
No Ans Shown when the destination being called did
not answer.
Busy Shown when unable to complete communica-
tion due to the line being busy.
M-Full Memory-full is shown when the FAX file memory
became full during reception and reception
failed.