User Manual

Transmission
3
bizhub 500/420 3-11
Transmission Chapter 3
3.3.1 Original Image Type
Set Quality according to the contents of the original. There are 4 types of
Quality settings. Text is default at the time of purchase.
3.3.2 Density
Set Density according to the lightness or darkness of the original. Density
can be set in 9 steps. [Std.] is set at the time of purchase.
Text Press this when scanning originals containing text only.
If this mode is selected and an original of pictures is scanned,
neutral tints of the pictures turn black without being reproduced.
Text/Photo Press this when scanning originals containing both text and pho-
tographs (half-tone).
Select this mode in either case when both characters and pic-
tures are contained in one page, and when both pages of charac-
ters and those of pictures are contained in one document.
Photo Press this when scanning originals containing photographs (Half-
tone) only.
Dot Matrix Press this when scanning originals containing text which are thin-
ly written in pencil as a whole.
Light Press to scan originals so that they are lighter than the density de-
tected with Standard.
Std.(Auto) Press to scan originals at a density that is between Darker and
Lighter. Used when returning to the default setting.