Owner manual

C353P 2-39
Administrator Operations
2
2.9.3 Changing the Mode Using SSL
2
Note
Do not leave the machine with the Admin Mode setting screen left shown on the display. If it is
absolutely necessary to leave the machine, be sure first to log off from the Admin Mode.
Select "Admin. Mode and User Mode" for "Mode using SSL/TLS."
<Setting can be made only from PageScope Web Connection>
0 For call the SSL/TLS Setting menu to the display, see steps 1 through 3 of "Setting the SSL" on
page 2-35.
1 Start PageScope Web Connection and call the SSL/TLS Setting menu to the display.
2 Select [Set Mode using SSL] and click the [OK].
3 Select Mode using SSL/TLS and click [OK].
4 Click the [OK].