Owner manual

C353P 2-45
Administrator Operations
2
<From PageScope Web Connection>
0 For the procedure to call the Admin Mode to the display, see "Accessing the Admin. Settings" on
page 2-2.
1 Start PageScope Web Connection and access the Admin Mode.
2 Click the [Network] tab.
3 Click the [SNMP Setting] menu.
4 Enter the auth-password and priv-password in the boxes marked by the rectangle, that is, the Write
side SNMP v3 Setting.
5 Click the [OK].
?
What happens if the auth-password and priv-password entered does not meet the requirements of
Password Rules?
% If the auth-password and priv-password entered does not comply with the Password Rules, a
message appears that tells that the auth-password and priv-password entered cannot be used.
Enter the correct auth-password and priv-password. For details of Password Rules, see "Password
Rules" on page 1-8.