Owner manual

C353P 2-48
Administrator Operations
2
<From PageScope Web Connection>
0 For the procedure to call the Network menu to the display, see steps 1 and 2 of "Changing the auth-
password and priv-password" on page 2-41.
1 Start the PageScope Web Connection and call the Network menu to the display.
2 Click the [TCP/IP Setting] menu.
3 Select [Manual Setting] from the IP Address Setting Method pull-down menu.
4 Enter the IP Address in the "IP Address" box.
– If [Auto Setting] is selected from the IP Address Setting Method pull-down menu in step 3, select
the means with which to acquire the IP Address automatically, including DHCP, BOOTP, ARP/PING,
and AUTOIP setting.
5 Click the [OK].
6 Click the [OK].
7 Click the [Logout].