User’s Guide [PageScope Web Connection Operations]
Introduction Introduction Thank you for purchasing this machine. This User’s Guide describes device management functions, operations, and cautions for usage of PageScope Web Connection. In order to allow functionality of this product fully and to use it effectively, please read this User’s Guide as necessary. In order to ensure that this machine is used safely, carefully read the Quick Guide [Copy/Print/Fax/Scan/Box Operations] before using the machine.
Introduction 2. 3. 4. 5. 6. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.
Introduction The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.
Introduction GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Part 4: Sun Microsystems, Inc. copyright notice (BSD) Copyright © 2003 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A. All rights reserved.
Introduction * Neither the name of Cisco, Inc, Beijing University of Posts and Telecommunications, nor the names of their contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Introduction Note This User’s Guide may not be reproduced in part or in full without permission. KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. shall not be responsible for any consequences that may result from using either this printing system or this User’s Guide. Information included in this User’s Guide is subject to change without notice. Copyright for the printer driver is the property of KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.
Introduction SOFTWARE LICENSE AGREEMENT This package contains the following materials provided by Konica Minolta Business Technologies, Inc. (KMBT): software included as part of the printing system, the digitally-encoded machine-readable outline data encoded in the special format and in the encrypted form ("Font Programs"), other software which runs on a computer system for use in conjunction with the Printing Software ("Host Software"), and related explanatory written materials ("Documentation").
Introduction Contents Introduction OpenSSL statement ................................................................................................................................x-1 NetSNMP License ...................................................................................................................................x-3 Kerberos ..................................................................................................................................................
Introduction 3 C650 2.4 Direct Print tab..................................................................................................................................... 2-22 Direct Print ..............................................................................................................................................2-22 2.5 Store Address tab ................................................................................................................................
Introduction PS Setting...............................................................................................................................................3-41 XPS Settings...........................................................................................................................................3-42 Interface Setting .....................................................................................................................................3-42 4 3.5 Store Address tab ..
Introduction About this user’s guide This User’s Guide contains information for using the device management functions in PageScope Web Connection. For details on the copy functions, scanning functions, box functions, and fax functions, refer to the respective User’s Guide. This User’s Guide is aimed at users who already have a basic knowledge of computer and copy operations. For Windows or Macintosh operating system and application operations, refer to the operation manual of the respective product.
Introduction User’s Guide [Advanced Function Operations] This User’s Guide describes overview and usage of functions that become available by registering the optional license kit and enabling its function, and functions that become available by connecting the MFP with applications. In order to use the functions effectively, please read this User’s Guide. The following models support the advanced function.
Overview 1 1 Overview 1.1 Using PageScope Web Connection PageScope Web Connection is a device management utility supported by the HTTP server integrated into the printer controller. Using a Web browser on a computer connected to the network, machine settings can be specified and the status of the machine can be checked. In addition to the convenience of specifying some settings from your computer instead of with the machine’s control panel, text can easily be typed in.
Overview 1 Web browser cache The most recent information may not appear in the PageScope Web Connection pages because older versions of pages are saved in the cache for the Web browser. In addition, problems may occur when the cache is used. When using PageScope Web Connection, disable the cache for the Web browser. 2 Reminder The menus and commands may vary depending on the Web browser version. For details, refer to the Help for the Web browser.
Overview 1 Structure of pages The pages of PageScope Web Connection are constructed as shown below. 3 4 5 6 7 8 1 2 9 10 11 12 C650 No. Item Description 1 Konica Minolta logo Click the logo to go to the Konica Minolta Web site at the following URL. http://konicaminolta.com This logo is omitted from this manual in the rest. 2 PageScope Web Connection logo Click the logo to display the version information for PageScope Web Connection. This logo is omitted from this manual in the rest.
Overview 1 ! Detail The page that appears immediately after accessing the machine with PageScope Web Connection is called the User mode page. This page appears when a user has logged on. If user authentication settings have been specified, the user name and password must be entered. For details, refer to "Logging on as a registered user" on page 1-9. The PageScope Web Connection pages appear differently depending on the options installed on the machine and the specified machine settings.
Overview 1.2 1 Logging on and logging off Logon and logout operations When the machine is accessed with PageScope Web Connection, the logon page appears if user authentication and account track settings have been specified on the machine. If user authentication and account track settings have not been specified, the page for a public user appears. In order to log on as a different user or as an administrator after logon, it is necessary to log off first, then log on again.
Overview 1 Log on again as an administrator. When user authentication and account track settings are specified The User Authentication/Account Track screen appears. Enter the required information to log on. To log on as a different user or an administrator, log off.
Overview 1 Log on again. Logging off When the [Logout] in the upper right screen is clicked, a logoff confirmation screen appears. Click [OK], and the logon page appears again.
Overview 1 ! Detail The logon page that appears differs depending on the authentication settings specified on the machine. If a timeout occurs because no operation is performed for a set length of time while logged on or if the authentication settings are changed from the machine’s control panel while logged on to User mode, you will automatically be logged off. For details on specifying the timeout periods for User mode and Administrator mode, refer to "Auto Logout" on page 3-34.
Overview 1 Logging on as a registered user If user authentication settings have been specified on the machine, the name and password for a registered user is required to log on. In the logon page, enter the user name and the password, and then click the [Login] button. If account track settings have been specified, type in the account name and password. To select a user name from a list, click the [User List] button. If external server authentication is selected, select a server.
Overview 1 Logging on to Administrator mode In order to specify system and network settings, log on to Administrator mode. In the logon page, select "Administrator" and then click the [Login] button, enter the administrator password, and then click the [OK] button. 2 Note When logged on to Administrator mode, the control panel of the machine is locked and cannot be used. Depending on the status of the machine, you may not be able to log on to Administrator mode.
Overview 1 2 Reminder If "Prohibited Functions When Authentication Error" in Administrator mode is set to "Mode 2" and an incorrect password is entered the specified number of times, it is no longer possible to log on to Administrator mode. For details on the "Prohibited Functions When Authentication Failed" parameter, refer to the User’s Guide [Copy Operations]. The password input page that appears differs depending on the settings specified on the machine.
User mode 2 2 User mode The User mode provides functions for checking and operating the machine on a user level. You can select from five tabs (Information, Job, Box, Direct Print, and Store Address). This section contains descriptions of the items in the menu that appears on the left side of the page when each User mode tab is clicked. ! Detail For details on the functions, refer to the User’s Guide [Box Operations], User’s Guide [Network Scanner Operations] and the User’s Guide [Print Operations]. 2.
User mode 2 ! Detail If "HTML" was selected as the display format during logon, the [Detail] button appears under "Paper Tray". Select a paper tray and click the [Detail] button to view detailed information about the selected paper tray. For details on displaying information about unavailable features, contact your technical representative. Device Information - Option The size of the machine’s memory, the hard disk status, and the installation status of options can be displayed.
User mode 2 Item Description Toner (Yellow/Magenta/Cyan/Black) Imaging Unit (Yellow/Magenta/Cyan/Black) Waste Toner Box Ozone Filter Hole-Punch Scrap Box Staple Cartridge (1, 2) Fusing Unit Image Transfer Belt Unit Transfer Roller Unit Color Toner Filter Displays information for each of the items. 2 Note The information that is displayed differs depending on the options that are installed. Device Information - Meter Count Counters managed by the machine can be displayed.
User mode 2 Online Assistance Support information for the machine can be displayed. Item Description Product Name Displays the product name. Contact Name Displays the information entered on the page that appeared after clicking "Online Assistance" in the menu on the Maintenance tab in Administrator mode. Contact Information Product Help URL Corporate URL Supplies and Accessories Online Help URL Driver URL Change User Password The password for the user who is logged on can be changed.
User mode 2 2 Reminder If "Password Rules" is set to "Enable", only a password containing 8 digits can be specified. If a user password containing less than 8 characters has already been registered, change the password so that it contains 8 characters before setting "Password Rules" to "Enable". For details on the password rules, refer to the User’s Guide [Copy Operations]. Function Permission Information Information on operations permitted by users and accounts can be displayed.
User mode 2 Network Setting Information Network settings for the machine can be displayed. Item Description Protocol Information Displays the usage status for each protocol. Network Information Displays information about the network. Print Setting Information Settings for the printer controller of the machine can be displayed. A print job sent with no settings specified is printed with these settings. The following information can be selected from the submenu.
User mode 2 Item Description Default Setting Displays information for each of the items. Font Information Macro List ICC Profile List PCL Setting PS Setting XPS Settings Print Information Font and settings information can be printed. Select the report to be printed, select a paper tray from the "Paper Tray" list, and then click the [OK] button. Item Description PS Font List Prints the list of fonts that can be used with PostScript.
User mode 2.2 2 Job tab On the Job tab, the jobs managed by the machine are displayed. The display of the Job tab differs depending on the display format selected during logon. Current Jobs The jobs being performed and the jobs queued to be performed can be viewed. Select a job type, and then click the [Go] button. Select from the following job types. * Item Description Print Displays a list of print jobs and their details. TX Displays a list of transmission jobs and their details.
User mode 2 Job History The completed jobs can be viewed. Select a job type, and then click the [Go] button. Select from the following job types. * Item Description Print Displays a list of print jobs and their details. TX Displays a list of transmission jobs and their details. RX* Displays a list of fax reception jobs and their details. Save Displays a list of user box jobs and their details. Appears if fax operations are available.
User mode 2 Communication List The completed transmission and reception jobs can be viewed. Select a job type, and then click the [Go] button. Select from the following job types. * Item Description Scan to E-mail Displays a list of scan transmission (e-mail, FTP and SMB) jobs and their details. Fax TX* Displays a list of fax transmission jobs and their details. Fax RX* Displays a list of fax reception jobs and their details. Appears if fax operations are available.
User mode 2.3 2 Box tab From the Box tab, user boxes can be created for use with the User Box mode or user box settings can be changed. In addition, documents in user boxes can be printed, sent or downloaded. For details on the various user boxes and User Box mode functions, refer to the User’s Guide [Box Operations]. 2 Note If an administrator or user box administrator is logged on, the settings for user boxes can be changed or the user boxes can be deleted without the box password being entered.
User mode 2 ! Detail When the name of a user box is clicked, a page for entering the password appears if a password has been specified for the box. Item Description [User Box Setting] button Click this button to change the user box settings. For details, refer to "Changing user box settings" on page 2-16. [Delete User Box] button Click this button to display a page to delete the user box. Thumbnail View Select whether or not thumbnails are displayed in the list of documents.
User mode 2 Document operations Select from the following document operations. Display All Print Send to other device Download to PC Move/Copy Delete ! Detail "Send to other device" and "Download to PC" can be used with documents saved in Fax/Scan mode. Some operations and documents may not be available, depending on the function limitation and output permission settings specified for the account or user who is logged on.
User mode 2 3 Specify the desired settings, and then click the [OK] button. When the [Print Setting] button is clicked – Click the [Cancel] button to return to the File List page. Settings available with the [Print Setting] button C650 Item Description Change order This appears if multiple documents were selected. Select a document, and then click the [Top], [Up], [Down] or [Bottom] button to change the document order. To return the documents to their original order, click the [Undo] button.
User mode 2 Settings available with the [TX Setting] button Item Description Change order This appears if multiple documents were selected. Select a document, and then click the [Top], [Up], [Down] or [Bottom] button to change the document order. To return the documents to their original order, click the [Undo] button. To display the document list as thumbnails, click the [Thumbnail View] button. Specify destination To select from a list of destinations, click the [Search from List] button.
User mode 2 Item Description Selected File Displays the names of the selected documents. When multiple documents are selected, the [Thumbnail View] button appears. To display the documents as thumbnails, click the [Thumbnail View] button. Changing user box settings % In the File List page, click the [User Box Setting] button. Item C650 Description User Box Number Displays the user box number. This cannot be changed. User Box Name Type in a user box name of a maximum of 20 characters.
User mode 2 Create User Box New user boxes can be created. Item Description User Box Number Select how the registration number is to be specified ("Use opening number" or "Input directly"). If "Input directly" is selected, type in the number. If "0" is specified, the user box is automatically registered with the next available number. (Range: 1 to 999999999). User Box Name Type in the user box name (up to 20 characters).
User mode 2 Open System User Box "Open System User Box" appears when the optional fax kit is installed. System user boxes (Bulletin Board User Box, Polling TX User Box, Memory RX User Box, Relay User Box) can be opened, and basic user box information and the list of documents saved in the user box can be displayed. 2 Note If an administrator is logged on, system user boxes are displayed in the same way as in Administrator mode. For details, refer to "Open System User Box" on page 3-36.
User mode 2 Change settings of the bulletin board user box Item Description User Box Number Displays the user box number. This cannot be changed. User Box Name Type in a user box name (up to 20 characters). Auto Delete Document Select the length of time ("Save", "12 hours", "1 day", "2 days", "3 days", "7 days" or "30 days") that a document is stored in a user box. User Box Password is changed. To change the user box password, select the check box.
User mode 2 Create System User Box "Create System User Box" appears when the optional fax kit is installed. New bulletin board user boxes and relay user boxes can be created. Select the user box type, and then click the [OK] button. 2 Note If an administrator is logged on, system user boxes are created in the same way as in Administrator mode. For details, refer to "Create System User Box" on page 3-38.
User mode 2 For a relay user box Item Description User Box Number Select how the registration number is to be specified ("Use opening number" or "Input directly"). If "Input directly" is selected, type in the number. If "0" is specified, the user box is automatically registered with the next available number. (Range: 1 to 999999999). User Box Name Type in the user box name (up to 20 characters). Relay Address Click the [Search from List] button, and then select an address from a list.
User mode 2.4 2 Direct Print tab From the Direct Print tab, files can be specified and printed. Direct Print Click the [Browse] button to select the file, and then click the [Print] button. To change the print settings that are displayed, click the [Change Settings] button. 2 Note If authentication settings have been specified and "Print without Authentication" is set to "Allow", direct printing can be used. Specify the setting for "Print without Authentication" from the control panel.
User mode 2.5 2 Store Address tab From the Store Address tab, transmission destinations and user box destinations for saving data can be registered and their settings can be changed. ! Detail This menu appears if the user is permitted to change registered destinations. For details on specifying the setting that allows users to change registered destinations, refer to "Permission of Address Change" on page 3-34.
User mode 2 Registering a destination 1 In the Address Book List page, click the [New Registration] button. 2 Select the transmission type, and then click the [OK] button. A page for registering a destination appears. For an e-mail address If "E-mail" was selected C650 Item Description No. Specify the registration number. Select "Use opening number" or "Direct Input". If "Direct Input" is selected, type in the number.
User mode 2 Item Description Registration of Certification Information Select this check box to register certificate information. Select "Registration of Certification Information". Click the [Browse] button, and then specify the certificate information. Only files in the DER (Distinguished Encoding Rules) format are supported for certificate information. To delete the certificate information, select "Deletion of Certification Information".
User mode 2 Item Description User ID Type in the user ID for the destination computer (up to 127 characters). Password Type in the password for the destination computer (up to 14 characters). Limiting Access to Destinations To specify the access level of the destination, click the [Display] button. If an access permission group is specified for the user who is logged on, the settings for "Search from Reference Allowed Group" appear.
User mode 2 If "Fax" was selected 2 Note "Fax" appears if the optional fax kit has been installed. Item Description No. Specify the registration number. Select "Use opening number" or "Direct Input". If "Direct Input" is selected, type in the number. If "0" is specified, the user box is automatically registered with the next available number. Name Type in the name of the destination (up to 24 characters). Index Select the index characters for the destination.
User mode 2 If "Internet Fax" was selected 2 Note "Internet Fax" appears if the Internet fax operation is available. Item Description No. Specify the registration number. Select "Use opening number" or "Direct Input". If "Direct Input" is selected, type in the number. If "0" is specified, the user box is automatically registered with the next available number. Name Type in the name of the destination (up to 24 characters). Index Select the index characters for the destination.
User mode 2 Registering an icon % Click the [Edit] button. A page for registering an icon appears. Item Description No. The registration number of the address book appears. Name The registered name of the address book appears. Specify Icon From [Search from List], specify an icon for the address book. Group The list of currently registered group destinations can be displayed, and destinations can be registered or their settings can be changed.
User mode 2 Registering a group destination % C650 In the Group List page, click the [New Registration] button. A page for registering a destination appears. Item Description Name Type in the name of the destination (up to 24 characters). Scan/Fax Address To select a destination number from a list of address book destinations, click the [Search from List] button. An address book destination can also be searched for using its number, index characters or type.
User mode 2 Program The list of currently registered program destinations can be displayed, and destinations can be registered or their settings can be changed. C650 Item Description Page (displays 12 at a time) Select a page, and then click the [Go] button to display the page. [Change Page Name] button Click this button to change the page name. No. Displays the registration number. Name Displays the name of the registered destination.
User mode 2 Registering a program destination 1 In the Program List page, click the [Registration] button for the number to be programmed. 2 Select the transmission type, and then click the [OK] button. A page for registering a destination appears.
User mode 2 For an e-mail address ! Detail To select a registered program destination from the machine, press the [Mode Memory] key in the control panel.
User mode 2 If "E-mail" was selected. C650 Item Description No. Displays the registration number. Name Type in the name of the program (up to 24 characters). Destination Information Specify the destination. Select "Select from Address Book" or "Direct Input". To select a destination from the address book, click the [Search from List] button, and then select from the list of address book destinations. An address book destination can also be searched for using its number or index characters.
User mode 2 Item Description Compose (Page) Specify whether to pint page numbers. To specify this item, specify settings for the following. • Page Number (Range: -99999 to 99999) • Chapter (Range: -100 to 100) • Page Number Type • Print Position • Fine-Tune (for making fine adjustments to the print position) • Color • Size Compose (Header/Footer) Selects whether to print a header/footer. To specify this item, specify the registration number of the header/footer.
User mode C650 2 Item Description Background Removal Adjust density of the background. Scan Size Select the document size ("Auto", "Standard Size" or "Custom Size"). If "Standard Size" is selected, select the size and the feed direction. If "Custom Size" is selected, specify the height and width. Application Setting Click the [Display] button, and then specify settings for the functions that are displayed. E-mail Notification Specify whether to send notification of scan data URL.
User mode 2 If "SMB" was selected C650 Item Description No. Displays the registration number. Name Type in the name of the program (up to 24 characters). Destination Information Specify the destination. Select "Select from Address Book" or "Direct Input". To select a destination from the address book, click the [Search from List] button, and then select from the list of address book destinations. An address book destination can also be searched for using its number or index characters.
User mode 2 Item Description Compose (Page) Specify whether to pint page numbers. To specify this item, specify settings for the following. • Page Number (Range: -99999 to 99999) • Chapter (Range: -100 to 100) • Page Number Type • Print Position • Fine-Tune (for making fine adjustments to the print position) • Color • Size Compose (Header/Footer) Selects whether to print a header/footer. To specify this item, specify the registration number of the header/footer.
User mode 2 Item Description Scan Size Select the document size ("Auto", "Standard Size" or "Custom Size"). If "Standard Size" is selected, select the size and the feed direction. If "Custom Size" is selected, specify the height and width. Application Setting Click the [Display] button, and then specify settings for the functions that are displayed. E-mail Notification Specify whether to send notification of scan data URL. Specify the destination address in the "Address" box.
User mode C650 2 Item Description Destination Information Specify the destination. Select "Select from Address Book" or "Direct Input". To select a destination from the address book, click the [Search from List] button, and then select from the list of address book destinations. An address book destination can also be searched for using its number or index characters. To check the transmission destinations, click the [Check Destination] button.
User mode 2 Item Description Compose (Stamp) Specify whether to print the stamp. To specify this item, specify settings for the following. • Preset Stamp or Registered Stamp • Print Position • Fine-Tune (for making fine adjustments to the print position) • Color • Pages • Size To check a registered stamp, click the [Confirm Registed Contents] button. A registered stamp must first be registered from the control panel. Stamp Combine Method Select "Image" or "Text".
User mode 2 Item Description Compose (Date/Time) Specify whether to print the date/time. To specify this item, specify settings for the following. • Date Type • Time Type • Print Position • Fine-Tune (for making fine adjustments to the print position) • Color • Pages • Size Compose (Page) Specify whether to pint page numbers. To specify this item, specify settings for the following.
User mode 2 Item Description Scan Size Select the document size ("Auto", "Standard Size" or "Custom Size"). If "Standard Size" is selected, select the size and the feed direction. If "Custom Size" is selected, specify the height and width. Application Setting Click the [Display] button, and then specify settings for the functions that are displayed. Password TX Select whether or not to enable password transmission. If "ON" is selected, specify the password.
User mode C650 2 Item Description Destination Information Specify the destination. Select "Select from Address Book" or "Direct Input". To select a destination from the address book, click the [Search from List] button, and then select from the list of address book destinations. An address book destination can also be searched for using its number or index characters. To check the transmission destinations, click the [Check Destination] button.
User mode 2 Item Description Compose (Stamp) Specify whether to print the stamp. To specify this item, specify settings for the following. • Preset Stamp or Registered Stamp • Print Position • Fine-Tune (for making fine adjustments to the print position) • Color • Pages • Size To check a registered stamp, click the [Confirm Registed Contents] button. A registered stamp must first be registered from the control panel. Stamp Combine Method Select "Image" or "Text".
User mode 2 Item Description Special Original Select "Normal", "Mixed Original", "Z-Folded Original" or "Long Original" as the setting for the loaded document. Book Scan Specify whether to perform book scan. To specify this item, select settings for the scanning method and center erasing. If any setting other than "Book Spread" is selected for the scanning method, select the binding direction. Erase Specify whether to perform frame erase.
User mode C650 2 Item Description Color Select the color mode. The file formats that can be saved may be limited according to the Color setting. For details, refer to the User’s Guide [Network Scanner Operations]. Separate Scan Select either "ON" or "OFF". Density Select the density. Background Removal Adjust the density of the background. Scan Size Select the document size ("Auto", "Standard Size" or "Custom Size"). If "Standard Size" is selected, select the size and the feed direction.
User mode 2 Item Description Limiting Access to Destinations To specify the access level of the destination, click the [Display] button. If an access permission group is specified for the user who is logged on, the settings for "Search from Reference Allowed Group" appear. If "Search from Reference Allowed Group" is selected, click the [Search from List] button, and then select an access permission group from the list. If "Set direct Reference Allowed Level" is selected, select a level.
User mode 2 Subject A maximum of 10 subjects for sending e-mail messages can be registered. Item Description E-mail Default Select the subject to be used if none is specified when sending e-mail. Subject Displays the registered e-mail subject. [Edit] button Click this button to display a page to register and edit e-mail subjects. [Delete] button Click this button to display a page to delete the registered e-mail subject.
User mode 2 Text A maximum of 10 texts for sending e-mail messages can be registered. Item Description E-mail Default Select the text to be used if none is specified when sending e-mail. Text Displays the registered e-mail text. [Edit] button Click this button to display a page to register and edit e-mail texts. [Delete] button Click this button to display a page to delete the registered e-mail text.
Administrator mode 3 3 Administrator mode In Administrator mode, you can specify system settings for the machine. You can select from six tabs (Maintenance, Security, Box, Print Setting, Store Address, and Network). This section contains descriptions of the items in the menu that appears on the left side of the page when each Administrator mode tab is clicked. For details on logging on to Administrator mode, refer to "Logging on to Administrator mode" on page 1-10.
Administrator mode 3 Item Description Paper Size/Type Counter Displays the counters for the paper sizes and paper types. ROM Version The ROM version is displayed. Import/Export Machine settings can be saved as a file (exported), or settings can be written to the machine (imported). Select the information to be imported/exported, and then click the [Import] button or [Exoport] button. C650 Item Description Device Setting Imports or exports device settings.
Administrator mode 3 Item Description Authentication Information Backs up and restores the entire authentication data. Also, user registration information and authentication data can be imported or exported. When using an optional authentication unit on this machine, authentication data can be imported or exported. When exporting authentication information, a password can be specified if necessary. The specified password is required when importing the authentication information.
Administrator mode 3 Status Notification Setting Specify settings for sending a notification if a machine error occurred. Settings can be specified for the destination of error notifications and the occasions when notifications are sent. C650 Item Description Destination Displays the type of notification address. To send the notification to an SNMP manager, specify the IP address or the IPX address. To send a notification by e-mail, specify the e-mail destination.
Administrator mode 3 Status Notification Setting page Item Description Notification Address Type in the notification address. Replenish Paper Tray Notifies when the paper tray runs out of paper. JAM Notifies when a paper misfeed occurs. PM Call Notifies when a periodic inspection should be performed. Replace Staples Notifies when there are no more staples. Replenish Toner Notifies when there is no toner. Finisher Tray Full Notifies when the finisher tray capacity has been reached.
Administrator mode 3 Total Counter Notification Setting Specify the settings for sending notifications of the total counter by e-mail and the e-mail address where notifications are sent. C650 Item Description Total Counter Notification Setting Type in the name of the model to appear in the list (up to 20 characters). Schedule Setting Specify the conditions for the notification schedule. Schedules 1 and 2 can be registered with different settings.
Administrator mode 3 Machine Setting The registered machine information can be changed. Item Description Device Name Type in the device name (up to 255 characters). Device Location Specify the device location (up to 255 characters). Administrator Name Type in the administrator name (up to 255 characters). Admin. E-mail Address Specify the address for the administrator (up to 128 characters, up to 127 characters when creating an SSL certificate in order to enable S/MIME).
Administrator mode 3 Item Description Online Help URL Specify the following URL for the online manual (excluding < and >). http://pagescope.com/download/webconnection/ onlinehelp/c650/help.html Driver URL Specify the driver storage location (up to 127 characters, excluding < and >). Date/Time Setting - Manual Setting Specify the date and time for the machine. C650 Item Description Year Type in the year. Month Type in the month. Day Type in the day. Hour Type in the hour.
Administrator mode 3 Date/Time Setting - Time Adjustment Setting Select whether the date and time of the machine can be adjusted through passive acquisition from the NTP server. Item Description Time Adjustment Setting Select whether or not the time is automatically adjusted with NTP. NTP Server Address Type in the NTP server address. To type in the host name, select the "Please check to enter host name." check box. If the machine is set to use IPv6, an IPv6 address can also be specified.
Administrator mode 3 Item Description Sleep Mode Setting Specify the length of time until the machine enters Sleep mode. Power Save Key Select the power-saving mode ("Low Power" or "Sleep") that the machine enters. Timer Setting - Weekly Timer Setting Specify the weekly timer settings for the machine. Item Description Use Weekly Timer To use the weekly timer function, select this check box, and then specify the operating days and time.
Administrator mode 3 Item Description TWAIN Lock Time Specify the automatic unlocking time. (Range: 30 to 300 seconds) 2 Note If optional image controller IC-409 has been installed, this parameter is not available. Reset - Network Setting Clear The machine’s network settings can be reset to those specified when the machine was shipped from the factory. Click the [Clear] button to perform the operation.
Administrator mode 3 Reset - Reset The printer controller can be reset. Click the [Reset] button to perform the operation. Reset - Format All Destination All destinations registered on the machine can be erased. Click the [Format] button to perform the operation.
Administrator mode 3 External Memory Function Settings Specify settings for using external memory on this machine. Item Description Save Document To send scanned data to external memory, select "ON". To prevent data from being stolen, "OFF" is specified as default. To use an external memory, select "ON". Print Document To print data in external memory, select "ON". Header/Footer Registration The list of headers/footers can be displayed, and they can be registered or edited.
Administrator mode 3 Item Description [Edit] button Click this button to display a page to register and edit header/footer text strings [Delete] button Click this button to display a page to delete the registered header/footer. Registration Screen Item C650 Description No. Displays the registration number. Name Type in the name to be registered. Color Select the color. Pages Select the pages to be printed on. Size Select the size. Date/Time Setting Select the date and time formats.
Administrator mode 3 License Settings - Get Request Code A request code can be issued. Click the [OK] button to perform the operation. ! Detail For details on acquiring a license code and installing the license, refer to the Quick Guide [Copy/Print/Fax/Scan/Box Operations]. License Settings - Install License Settings can be specified to enable functions. Item Description i-Option LK-101/102/103 Select a function to be enabled, and then select "Registered".
Administrator mode 3.2 3 Security tab From the Security tab, specify security settings for the machine. Authentication - User Auth/Account Track Specify user authentication and account track settings for the machine. Item Description General Settings Select the authentication method ("OFF", "ON (External Server)" or "ON (MFP)"). Public User Access Select whether or not public user access is permitted when user authentication settings are specified.
Administrator mode 3 Authentication - External Server Registration The list of external authentication servers for the machine can be displayed, and new external authentication servers can be registered or their settings can be changed. C650 Item Description Default The selected server is used if external server authentication is not specified when a user or account is registered. External Server Name Displays the registered name.
Administrator mode 3 Registration Screen Item Description No. Displays the registration number. External Server Name Type in the name of the external authentication server (up to 32 characters). External Server Type Select the type of external authentication server. Active Directory If "Active Directory" is selected as the server type, type in the default domain name. NTLM If "NTLM" is selected as the server type, type in the default domain name.
Administrator mode 3 Authentication - Default Function Permission When external server authentication is specified, unregistered users are registered with the default function limitation settings. Item Description Copy Select whether or not to allow each operation.
Administrator mode 3 Item Description [New Registration] button Click this button to register a new user. For details, refer to "Registering a user" on page 3-21. Search from Number Select a range of registration numbers, and then click the [Go] button to display the list of users with the specified numbers. No. Displays the registration number. User Name Displays the registered user name. [Edit] button Click this button to display a page for editing the settings for the registered user.
Administrator mode 3 Registering a user % C650 In the User Registration page, click the [New Registration] button. A page for registering a user appears. Item Description No. Type in the registration number. User Name Type in the user name. E-mail Address Type in the e-mail address. User Password Type in the password. Retype User Password Type in the password again. Account Name If user authentication and account track are synchronized, specify the account that the user belongs to.
Administrator mode 3 Item Description Function Permission Select whether or not to allow each of the following operations. • Copy • Scan • Save to External Memory • Fax • Print • User Box • Print Scan/Fax from User Box • Manual Destination Input Output Permission (Print) Select whether or not to allow color or black-and-white outputs. Output Permission (TX) Select whether or not to allow color outputs. Max.
Administrator mode 3 This menu item does not appear if authentication is performed with PageScope Authentication Manager. Registering an account % In the Account Track Registration page, click the [New Registration] button. A page for registering an account appears. Item Description No. Type in the registration number. Account Name Type in the account name. If "Account Track Input Method" is set to "Password Only", "Name" appears. Password Type in the password.
Administrator mode 3 2 Note The page contents differ depending on the registered information. If a certificate is not installed, the following page appears. Creating a certificate or obtaining the format from a certification authority and installing it enables SSL/TLS. To register new certificates or change or delete registered ones, click the [Setting] button.
Administrator mode 3 Creating a certificate On the page that appears, specify settings for the following. If "Create a self-signed Certificate" was selected C650 Item Description Common Name Displays the IP address or domain name of the machine. The information for the accessed machine is displayed. Organization Type in the name of the organization or group used for creating an organization certificate (up to 63 ASCII characters).
Administrator mode 3 If "Request a Certificate" was selected Item Description Common Name Displays the IP address or domain name of the machine. The information for the accessed machine is displayed. Organization Type in the name of the organization or group used for creating an organization certificate (up to 63 ASCII characters). Organizational Unit Type in the name of the account used for creating an account certificate (up to 63 ASCII characters).
Administrator mode 3 3 Specify the various settings. Sample page for creating a self-signed certificate 4 Click the [OK] button. The certificate is registered or obtained. – – 5 Copy the contents of the certificate, and then click the [OK] button. – 6 If a certificate was requested, continue with step 5. If a self-signed certificate was created, this completes the procedure. To save the certificate information, click the [Save] button. On the SSL/TLS Information page, click the [Setting] button.
Administrator mode 7 3 On the SSL/TLS Setting page, select "Install a Certificate", and then click the [OK] button. A text input page appears. 8 Copy the contents of the issued certificate, paste it into the text box, and then click the [OK] button. 9 Select encryption method and application modes, and then click the [Install] button. 10 Click the [OK] button. 2 Reminder If a new certificate was created, log off from Administrator mode.
Administrator mode 3 Specifying an encryption level setting 1 On the SSL/TLS Setting page, select "Set an Encryption Strength", and then click the [OK] button. 2 Select the encryption level, and then click the [OK] button. The following encryption level settings are available.
Administrator mode 2 3 Check the message that appears, and then click the [OK] button. 2 Note If "Enhanced Security Mode" is set to enable, a certificate cannot be removed. Specifying the modes using SSL The modes that use SSL can be selected. C650 1 On the SSL/TLS Setting page, select "Set Mode using SSL", and then click the [OK] button. 2 Select the mode using SSL/TLS. 3 Click the [OK] button.
Administrator mode 3 ! Detail If "Enhanced Security Mode" is set to enable, "Mode using SSL/TLS" is set to "Admin. Mode and User Mode". Downloading certificates 1 On the SSL/TLS Setting page, select "Certificate Download", and then click the [OK] button. 2 Click the [Download] button, and then click the [Save] button. Downloading begins. 3 Click the [Back] button.
Administrator mode 3 ! Detail The setting for "Action for Invalid Certificate" is applied to the following functions. SMTP over SSL POP over SSL LDAP over SSL WebDAV over SSL When encrypt the communication from this machine to a Windows Vista - ecuipped computer using SSL. Address Reference Setting - Reference Allowed Group Registration The list of access permission groups can be displayed, and new access permission groups can be registered or their settings can be changed.
Administrator mode 3 Clicking the [Edit] button displays a registration page. Item Description No. Displays the registration number. Reference Allowed Group Name Type in the name of the access permission group (up to 24 characters). Access Allowed Level Select the access permission level. Access Allowed Level can be set to one of six levels between 0 and 5, with the higher number indicating higher security. For details on Access Allowed Level, refer to the User’s Guide [Copy Operations].
Administrator mode 3 Permission of Address Change Select whether or not to allow users to register destinations. Item Description Registering and Changing Addresses Select either "Allow" or "Restrict". 2 Note If "Restrict" is selected, the menu on the Store Address tab of User mode does not appear. If "Enhanced Security Mode" is set to enable, "Restrict" is selected. Auto Logout Specify the length of time until Administrator mode or User mode is automatically logged off.
Administrator mode 3 Administrator Password Setting Specify the administrator password. Item Description Administrator Password Type in the administrator password (up to 8 characters, excluding “ and +). Retype Administrator Password Type in the administrator password again for confirmation. ! Detail If an SSL certificate is installed, "Administrator Password Setting" appears in the menu. If "Password Rules" is set to "Enable", only a password containing 8 digits can be specified.
Administrator mode 3.3 3 Box tab From the Box tab, user boxes can be created and basic user box information can be viewed. When logged on as an administrator, user box settings can be changed and user boxes can be deleted without the user box password being entered. For details on the various user boxes and User Box mode functions, refer to the User’s Guide [Box Operations]. ! Detail For details on "Open User Box" on the menu, refer to "Open User Box" on page 2-11.
Administrator mode 3 The user box information appears. – To change the user box settings, click the [User Box Setting] button. If "Annotation User Box" was selected C650 Item Description User Box Number Displays the user box number. This cannot be changed. User Box Name Type in a user box name (up to 20 characters). Auto Delete Document Select the length of time ("Save", "12 hours", "1 day", "2 days", "3 days", "7 days", "30 days" or "Do Not Keep") that a document is stored in a user box.
Administrator mode 3 ! Detail When authentication is performed with PageScope Authentication Manager and logged in to the Administrator mode, and then the personal user box is selected, [User Box Setting] and [Delete User Box] do not appear. For details on specifying settings when "Bulletin Board User Box" or "Relay User Box" is selected, refer to "Open System User Box" on page 2-18. If authentication is performed with PageScope Authentication Manager, "User Box Owner is changed".
Administrator mode 3 Item Description User Box Name Type in the user box name. If a user box password is to be specified, select the "Use Box Password" check box, and then type in the password (up to 8 characters, including only numerals, * and #). Auto Delete Document Select the length of time ("Save", "12 hours", "1 day", "2 days", "3 days", "7 days", "30 days" or "Do Not Keep") that a document is stored in a user box. Count Up Select the counting method.
Administrator mode 3.4 3 Print Setting tab Information and settings concerning the connection interface and default print settings are displayed on the Print Setting tab. Basic Setting The default printer settings can be specified. Item Description PDL Setting Select the printer definition language. Paper Tray Select the paper tray. Output Tray Select the output tray. 2-Sided Print Select whether or not double-sided printing is performed. Bind Direction Select the binding position.
Administrator mode 3 2 Note The information that is displayed differs depending on the options that are installed. PCL Setting The default settings for PCL mode can be specified. Item Description Symbol Set Select the symbol set. Typeface Select the font. Font Size Specify either the font pitch (Range: 0.44 to 99.00) or the font point size (Range: 4.00 to 999.75), depending on the selected font. Line/Page Type in the number of lines per page.
Administrator mode 3 Item Description Print Settings Select the default settings for the RGB color and destination profile for image, text and graphics printing, and the default simulation profile. XPS Settings The default settings for XPS mode can be specified. Item Description Verify XPS Digital Signature Specify whether to verify digital signature. When "ON" is selected, the document without a valid digital signature is not printed.
Administrator mode 3.5 3 Store Address tab On the Store Address tab, transmission settings and information and settings concerning the destinations are displayed. ! Detail For details on the following menu items, refer to "Store Address tab" on page 2-23. Address Book, Group, Program, Temporary One-Touch, Subject, and Text Application Registration ! Detail "Application Registration" appears in the menu only if the following two conditions are met. • The optional fax kit is not installed.
Administrator mode 3 No. Button Name Function Name Keyboard Type Default Value Options 7 Billing Code 2 BillingCode2 ASCII - - 8 CoverSheet Type CoverSheet - - - 9 Hold For Preview HoldForPreview - - No If "Secure Docs" is selected No.
Administrator mode 3 In addition, specify settings for the custom items. Item Description Custom Item List When a template is selected, the custom items, button name and default values are displayed. To add or change settings, click the [Edit] button. Specify details for the following for the function button. Item Description No. Displays the number of the selected item. Button Name Type in the name of the button (up to 16 characters). Function Name Select the function name from the following.
Administrator mode C650 2 Select the template type, and then click the [Next] button. 3 Specify the application settings, and then click the [Next] button. 4 Specify settings for the custom items for the button.
Administrator mode 3 5 Click the [Edit] button to specify details for each function. After specifying the settings, click the [OK] button. 6 Click the [OK] button. Items that can be specified when editing applications Settings can be specified for the following items when editing applications. Application Setting Item Description No. Displays the registration number of the selected application. Application Name Type in the name of the application (up to 16 characters).
Administrator mode 3 Item Description Host Address Type in the host address for the server registering the application (up to 15 characters). File Path Type in the file path for the application (up to 96 characters). User ID Type in the user ID for logging on to the server (up to 47 characters). Password Type in the password for logging on to the server (up to 31 characters). anonymous Select whether or not anonymous is used. PASV Mode Select whether or not the PASV mode is used.
Administrator mode 3 Notification Setting Item Description Print Notification To send a notification when printing, select this check box. Port No. Type in the port number. (Range: 1 to 65535) Queue Name Type in the queue name (up to 32 characters). Event Select "Error", "Success" or "Always" for the type of event when notifications are sent.
Administrator mode 2 Select the type of item to be edited, and then click the [Next] button. 3 Specify the desired settings. 4 Click the [OK] button. 3 Deleting registered applications 1 Select the application to be deleted, and then click the [Delete] button. 2 Check the settings. 3 Click the [OK] button. The application name changes "Not registered".
Administrator mode 3 Prefix/Suffix Prefixes and suffixes can be registered to be added as destination information when sending e-mail messages. Item Description Prefix Displays the registered prefix. Suffix Displays the registered suffix. [Edit] button Click this button to display a page to register and edit a prefix/suffix. [Delete] button Click this button to display a page to delete the registered prefix/suffix. Registration page C650 Item Description No.
Administrator mode 3 Header Information Register sender information for transmissions. Item Description Sender Fax No. Register the sender fax number. Normally enter the fax number of this machine. Default Select the sender name to be used if none is specified when sending a fax. Sender Name Displays the registered sender name. [Edit] button Click this button to display a page to register and edit sender names.
Administrator mode 3.6 3 Network tab On the Network tab, information and settings concerning network connections are displayed. 2 Reminder In order to apply the changes to the settings on the Network tab, restart the machine (turn it off, then on again). When the machine is turned off, then on again, turn the machine off with the [Power] (auxiliary power) key before turning off the main power switch.
Administrator mode 3 Item Description * TCP/IP Select whether or not TCP/IP is used. Network Speed Select the operating speed. IP Address Setting Method* Select whether the IP address is automatically acquired or is directly entered. If it is automatically acquired, select the check boxes to specify the acquisition conditions. IP Address Specify the IP address of the machine. (Format: ***.***.***.***; Range for ***: 0 to 255) Subnet Mask Specify the subnet mask of the connected network.
Administrator mode 3 TCP/IP Setting - IP Filtering Specify the settings for IP address filtering. Access limitations can be set by specifying the IP address of the host. Item Description Permit Access Select whether or not to specify permitted address settings. Set 1 to 5 Type in the permitted addresses. (Format: ***.***.***.***; Range for ***: 0 to 255) Deny Access Select whether or not to specify denied address settings. Set 1 to 5 Type in the denied addresses. (Format: ***.***.***.
Administrator mode 3 TCP/IP Setting - IPsec Specify the IPsec function for encrypted transmissions, for example, the key management protocol. Item Description IPsec Select whether or not IPsec is used. 2 Reminder The settings for this function will fail to be specified if an invalid setting is specified for "IKE", "SA" or "Peer".
Administrator mode 3 IKE Setting Item Description Key Validity Period Specify the validity period of a key generated when creating a control tunnel. Diffie-Hellman Group Select "Diffie-Hellman Group". Encryption Algorithm Select the encryption algorithm to be used when creating a control tunnel. Authentication Algorithm Select the authentication algorithm to be used when creating a control tunnel.
Administrator mode 3 Peer Item Description Perfect Forward Secrecy To increase the IKE strength, select "ON". Peer Specify the IP address of the peer. Pre-Shared Key Text Specify the Pre-Shared Key text shared with the peer. Encapsulation Mode Specify the operation mode of IPsec. E-mail Setting - E-mail RX (POP) Specify settings when using POP before SMTP for authenticating the e-mail sender. C650 Item Description E-mail RX Setting Select whether or not e-mail is received.
Administrator mode 3 Item Description Use SSL/TLS Port No. (SSL) Select whether or not SSL/TLS is used. To use SSL/TLS, select the check box, and then type in the port number. (Range: 1 to 65535) Check for New Messages Specify whether or not the server is automatically checked for received e-mail messages. This appears if the Internet fax operation can be used. Polling Interval Specify the polling interval. (Range: 1 to 60 minutes) This appears if the Internet fax operation can be used.
Administrator mode 3 Item Description Port No. (SSL) Default setting: 465 If "SMTP over SSL" is selected, specify the port number to be used for SSL communication. Connection Timeout Specify the amount of time until communication with the server times out. Max Mail Size Select whether or not to limit the size of sent e-mail messages. Server Capacity Type in the capacity of the SMTP server when limiting e-mail message sizes. (Range: 1 to 100 Mbytes) Admin.
Administrator mode 3 E-mail Setting - S/MIME Specify the S/MIME settings. Item Description S/MIME Comm. Setting Select whether or not S/MIME communication is used. Digital Signature Select "Do not add signature", "Always add signature" or "Select when sending" as the digital signature setting. E-mail Text Encrypt. Method Select the encryption type for the body of e-mail messages. Automatically Obtain Certificates Select whether or not certificates are automatically obtained.
Administrator mode 3 E-mail Setting - I-Fax Advanced Setting Specify the advanced settings for Internet fax transmissions. "I-Fax Advanced Setting" appears if the Internet fax operation can be used. Item Description MDN Request Select whether MDN request is turned on or off. DSN Request Select whether DSN request is turned on or off. MDN Response Select whether MDN response is turned on or off.
Administrator mode 3 LDAP Setting - Setting Up LDAP Register the LDAP server. A maximum of 5 LDAP servers can be registered. Item Description Default Select the LDAP server to be used as the default. LDAP Server Name Displays the name of the LDAP server. [Check Connection] button If the LDAP settings are enabled, a button appears. Click this button to check the connection with the LDAP server. [Edit] button Click this button to display a page to register LDAP servers.
Administrator mode 3 Item Description No. Displays the number of the LDAP server. LDAP Server Name Type in the name of the LDAP server. Server Address Type in the address of the LDAP server. (Format: ***.***.***.*** or FQDN: Range for ***: 0 to 255) The only symbols that can be used are the dash (-) and period (.). To type in a host name, check the "Please check to enter host name." check box. If the machine is set to use IPv6, an IPv6 address can also be specified.
Administrator mode 3 IPP Setting Specify the settings for IPP printing. Item Description IPP Setting Select whether or not IPP printing is used Accept IPP Job Select whether or not to use IPP job acceptance. Printer Name Type in the name of the print server (up to 127 characters). Printer Location Type in the printer location (up to 127 characters).
Administrator mode 3 FTP Setting - FTP TX Setting Specify the transmission settings, such as the FTP proxy server. Item Description FTP TX Select whether or not the FTP TX function is used. Proxy Server Address Type in the address of the proxy server. (Format: ***.***.***.*** or FQDN: Range for ***: 0 to 255) To type in a host name, select the check box. If the machine is set to use IPv6, an IPv6 address can also be specified. Proxy Server Port Number Type in the port number for the proxy server.
Administrator mode 3 2 Note If "Enhanced Security Mode" is set to enable, "OFF" is selected. SNMP Setting Specify the SNMP settings. C650 Item Description SNMP Select whether or not SNMP is used. If yes, specify whether to use SNMP v1/v2 (IP), SNMP v3, and SNMP v1 (IPX). SNMP v1 (IPX) can be specified only when IPX is enabled. UDP Port Setting Default setting: 161 Specify the UDP port number. SNMP v1/v2c Setting Specify settings for using SNMP v1/v2c.
Administrator mode 3 Item Description auth-password Specify the reading/writing user authentication password to be used for authentication (up to 32 characters). priv-password Specify the reading/writing user privacy password to be used for privacy (encryption) (up to 32 characters). Encryption Algorithm Specify the encryption algorithm. Authentication Method Specify the authentication method.
Administrator mode 3 SMB Setting - Client Setting Specify the settings for the SMB client functions. Item Description SMB TX Setting Select whether or not SMB transmission is used. NTLM Setting Select the NTLM setting. User Authentication (NTLM) Select whether or not user authentication (NTLM) is used.
Administrator mode 3 Item Description SMB Print NetBIOS Name Select whether or not the SMB printing (Windows printing) service is used. * Print Service Name Type the NetBIOS name in uppercase letters (up to 15 characters, including only -). * Workgroup* Type the name of the print service in uppercase letters (up to 12 characters, excluding / and \). Type the name of the workgroup in uppercase letters (up to 15 characters, excluding “ \ ; : , * < > | + = and ?).
Administrator mode 3 Web Service Settings - Web Service Common Settings Specify the settings for using a Web Service Function. Item Description Friendly Name * SSL Setting Specify setting for Friendly Name (up to 62 characters). This appears if an SSL certificate is installed. Select "ON" when encryption is applied. 2 Reminder In order to apply the changes to the settings for items which are marked with an asterisk (*), restart the machine (turn it off, then on again).
Administrator mode 3 Item Description Print Function Select "ON". Printer Name* Specify the printer name (up to 63 characters). Printer Location* Specify the printer location (up to 63 characters). Printer Information* Specify the printer information (up to 63 characters). 2 Reminder In order to apply the changes to the settings for items which are marked with an asterisk (*), restart the machine (turn it off, then on again).
Administrator mode 3 Item Description Scan Function Select "ON". Scanner Name* Specify the scanner name (up to 63 characters). Scanner Location* Specify the scanner location (up to 63 characters). Scanner Information* Specify the scanner information (up to 63 characters). Connection Timeout Specify the time period before the server connection times out.
Administrator mode 3 NetWare Setting - NetWare Setting Specify the NetWare settings. Item Description IPX Setting * Select whether or not NetWare is used. Ethernet Frame Type NetWare Print Mode * * Select the frame type. Select either "PServer" or "Nprinter/Rprinter" as the operating mode for the print server. Print Server Name* Type in the name of the print server (up to 63 characters, excluding / \ ; : , * [ ] < > | + = ? and .).
Administrator mode 3 NetWare Setting - NetWare Status The server and print queue name are displayed to show the NetWare connection status. AppleTalk Setting Specify the AppleTalk settings. Item Description AppleTalk Select whether or not AppleTalk is used. Printer Name* Type in the name of the print server (up to 31 characters, excluding = and ~). Zone Name* Type in the zone name (up to 31 characters). Current Zone Displays the current zone name.
Administrator mode 3 Network Fax Setting - SMTP TX Setting Specify the settings for direct SMTP transmissions. Item Description Port Number Type in the port number. (Range: 1 to 65535) Connection Timeout Type in the amount of time until the connection times out. (Range: 30 to 300 seconds) 2 Note The settings are available if network fax operations can be used. Network Fax Setting - SMTP RX Setting Specify the settings for direct SMTP reception.
Administrator mode 3 2 Note The settings are available if network fax operations can be used. WebDAV Settings - WebDAV Client Settings Specify settings for sending scan data to the WebDAV server. C650 Item Definition WebDAV TX Setting Select "ON". Proxy Server Address To send data via a proxy server, specify the proxy server address. (Format: "***.***.***.***", Range for ***: 0 to 255) If the DNS server is specified, the address can be specified using the host name.
Administrator mode 3 WebDAV Settings - WebDAV Server Settings Specify settings for WebDAV server. This machine serves as an WebDAV server by specifying the following settings. To use an application that synchronizes with this machine as a WebDAV client, specify these settings. Item Description WebDAV Settings Select "ON". SSL Setting This appears if an SSL certificate is installed. To use SSL/TLS, select "SSL Only" or "SSL/Non-SSL".
Administrator mode 3 2 Note If "Enhanced Security Mode" is set to enable, the "Use SSL/TLS" check box is selected. If authentication is perfomed with PageScope Authentication Manager, specify the SSL/TLS settings, and then enable the SSL/TLS settings of the OpenAPI settings. If authentication is perfomed with PageScope Authentication Manager from the printer driver, set "Authentication" for OpenAPI Settings to "OFF" from the control panel. TCP Socket Setting Specify the TCP socket settings.
Appendix 4 4 Appendix 4.1 Glossary C650 Term Definition 10Base-T/100BaseTX/1000Base-T An Ethernet standard, which is a cable consisting of twisted copper wire pairs. The transmission speed of 10Base-T is 10 Mbps, of 100Base-TX is 100 Mbps, and of 1000Base-T is 1000 Mbps. 2in1 This is a function to send the page set as double page by consolidating the 2 page document on one paper. Abbreviation/ address This is a function to register the frequently used fax number of the recipient.
Appendix C650 4 Term Definition Bulletin board This function posts the documents to be viewed, or stores the documents to be transmitted through polling. Byte Unit of information (data quantity) on a computer or printer. Configured as 1 byte equals 8 bits. Check Dest. & Send A function for sending a fax only after a comparison of the specified fax number with the fax number information (CSI) for the recipient’s machine indicates a match.
Appendix C650 4 Term Definition DPI (dpi) Abbreviation for Dots Per Inch. A resolution unit used by printers and scanners. Indicates how many dots per inch are represented in an image. The higher the value, the higher the resolution. Driver Software that works as a bridge between a computer and a peripheral device. DSN Abbreviation for Delivery Status Notifications.
Appendix C650 4 Term Definition ICM Abbreviation for Image Color Management. The color management system used by Windows. Color differences of input/output devices, such as monitors, scanners and printers, are adjusted to reproduce colors so that they are nearly the same on any device.
Appendix C650 4 Term Definition MDN Abbreviation for Message Disposition Notifications. A delivery confirmation message that is sent back to the sender in response to such as request. Memory Storage device for storing data temporally. When the power is turned off the data may or may not be erased. Memory overflow A condition where the fax memory becomes full while scanned documents or temporarily stored documents are saved.
Appendix C650 4 Term Definition PASV Abbreviation for PASsiVe. A mode for connecting to an FTP server from within a firewall. If this mode is not specified, the firewall will be considered inaccessible and the connection will be terminated, pre-venting the file from being sent. Pause A temporary break in dialing. In this machine, each pause creates a one second break during dialing. PB Push telephone line PC-FAX A function for sending a fax directly from a computer without using paper.
Appendix C650 4 Term Definition Queue name • • Quick memory transmission This is the method to start sending of fax by scanning one page of the document at the same time. Even in case of multiple documents, this is a function to send the document without overflowing the memory. RAW port number The TCP port number used when the RAW protocol is selected for Windows TCP printing. Usually set to 9100. realm (IPP setting) Region for performing security functions.
Appendix C650 4 Term Definition S/MIME Abbreviation for Secure/Multipurpose Internet Mail Extensions. A protocol for adding features such as encryption and digital signatures to MIME (email operations). With this standard, public key encryption, which uses a different key for encryption and decryption, is used. SMB Abbreviation for Server Message Block. A protocol that shares files and printers over a network and which is mainly used by Microsoft Windows.
Appendix C650 4 Term Definition TWAIN The interface standard for imaging devices, such as scanners and digital cameras, and for applications, such as graphics software. In order to use a TWAIN-compliant device, the TWAIN driver is required. Uninstall To delete software installed on a computer USB Abbreviation for Universal Serial Bus. A general interface standard for connecting a mouse, printer, and other devices to a computer.
Index 5 5 Index 5.1 Index Numerics IPv6 ......................................................................3-53 2-Sided print ........................................................3-40 L A LDAP server registration ......................................3-63 License Settings ..................................................3-15 Limiting access to destinations ...........................3-21 Line/page .............................................................3-41 LPD ........................
Index 5 Symbol set ...........................................................3-41 System requirements .............................................1-1 T Temporary one-touch ..........................................2-48 Text ......................................................................2-50 Thumbnail ............................................................2-11 TRAP setting ........................................................3-67 U USB timeout .............................................
http://konicaminolta.com Copyright A00H-9647-33 2007 2008.
