Network Cables User Manual

ManualsBrandsKonica Minolta ManualsNetwork CableCM-SA

9222-1895-53 BCEBGA

Skin Analysis Software CM-SA

Installation Guide

Software License Agreement

The terms of the license agreement of the CM-SA software are provided in the Software License Agreement dia-

log box displayed on-screen during the installation process. This software can be installed only if you agree to all

the terms of the agreement.

Notes on Installation

• The CM-SA application software is designed to be used with the Windows XP, Windows Vista or Windows 7

operating system. Note that neither operating system is included with this software.

• One of these operating systems must be installed on the PC before this software can be installed.

• When inserting the CD-ROM into the CD-ROM drive, note the correct orientation of the disc. Insert it gently.

• Keep the CD-ROM clean and free from scratches. If the recorded surface becomes dirty or the label surface is

scratched, a read error may result.

• Avoid exposing the CD-ROM to rapid temperature changes and condensation.

• Avoid leaving it in locations where it may be exposed to high temperatures from direct sunlight or heaters.

• Do not drop the CD-ROM or subject it to strong impact.

• Keep the CD-ROM away from water, alcohol, paint thinners, and other such substances.

• Remove the CD-ROM from the CD-ROM drive while the computer is turned on.

Notes on Storage

• After using the CD-ROM, return it to its case and store in a safe place.

• Avoid leaving the CD-ROM in locations where it may be exposed to high temperatures from direct sunlight or

heaters.

• The CD-ROM should not be kept in areas of high humidity.

Every effort has been made to ensure the accuracy of the content of this software. However, should you have any

questions or comments, please contact the nearest KONICA MINOLTA authorized service facility.

Package Contents

• Skin Analysis Software CM-SA Installation CD-ROM: 1

• Installation Guide (this manual)

• Authorized Service Facility

The “Instruction Manual” is also installed in PDF form with a shortcut in the start menu during the software

installation.

To read the manual, go to <Start Menu -> All programs -> KONICAMINOLTA -> Skin Analysis Software CM-

SA -> Manual> PDF file. You will need the Adobe Reader

from Adobe Corporation. The latest Adobe Reader

could be downloaded for free from the Adobe website. Also, it is possible to use the Adobe Reader

installer

included with the installation CD-ROM for installation.

(Example) When the CD-Rom is in E drive E:\Adobe Reader\EN

Formal designations of application software used in this manual

Trademarks

• “Microsoft”, “Windows”, “Windows XP”, “Windows Vista” and “Windows 7” are registered trademarks of

Microsoft Corporation in the U.S.A. and other countries.

Other company names and product names mentioned in this manual are the registered trademarks or

trademarks of their respective companies.

Safety Precautions

Before you use the CM-SA software, we recommend that you thoroughly read this manual as well as the

instruction manuals of your PC and the instrument.

(Designation in this manual) (Formal designation)

Windows, Windows XP Microsoft

Windows

XP Professional Operating System

Windows, Windows Vista Microsoft

Windows

Vista Business Operating System

Windows, Windows 7 Microsoft

Windows

7 Professional Operating System

Summary of content (4 pages)

PAGE 1
Skin Analysis Software CM-SA Installation Guide Software License Agreement The terms of the license agreement of the CM-SA software are provided in the Software License Agreement dialog box displayed on-screen during the installation process. This software can be installed only if you agree to all the terms of the agreement. Safety Precautions Before you use the CM-SA software, we recommend that you thoroughly read this manual as well as the instruction manuals of your PC and the instrument.
PAGE 2
1. Installing the software The CM-SA software is provided on a CD-ROM. A CD-ROM drive is required to install the software. When installing the software, you must log on to the computer as a user with Administrator privileges. 1.1 Installation procedure Install the CM-SA software. If your OS is Windows Vista or Windows 7, a dialog which checks User Account Control is displayed during the process. When this dialog box is displayed, click Continue. Start Windows on your computer.
PAGE 3
2.1 Connecting to a PC/Installing the USB Driver (When the RS-232C cable or USB cable is used.) Although the USB cable can be connected/disconnected while the instrument and PC are turned ON, you need to turn them OFF in the procedure below. 1. Turn off both the instrument and the computer. 2. Connect the instrument and the computer via the RS-232C cable or USB cable as illustrated.
PAGE 4
6. If you were not able to install the USB driver using the procedure above, install it from Device Manager. From the Start menu, right-click “My Computer” or “Computer” and select “Properties” to open Device Manager. Right click “Spectrophotometer CM-700/600 Series” and select “Update Driver”. Select the folder where CM-SA has been installed and specify Kmsecm700.inf. 7. Check which COM port of the PC the instrument has been assigned to.