User Guide

ETTING UP AND RUNNING

EXTERNAL POWER SUPPLIES (SOLD SEPARATELY)

INSERTING AND CHANGING A MEMORY CARD

The AC Adapter allows the camera to be powered from an electrical household outlet. The AC

Adapter is recommended when the camera is interfaced with a computer or during periods of heavy

use. AC Adapter model AC-1L is for use in North America, Japan, and Taiwan, and AC-2L is for use

in all other areas.

The External High-power Battery Pack Kit EBP-100 is a portable power source and significantly

extends the operating time of the camera. The kit contains a high-power lithium-ion battery, holder,

and charger. The battery, holder, and charger are also available separately.

Insert the mini plug of the AC adapter or battery pack into the

DC terminal (2).

Insert the AC adapter plug into an electrical outlet.

Remove the DC terminal cover from the left (1). The cover is

attached to the body to prevent loss.

A memory card must be inserted for the camera to operate. If a card has not been inserted, a no-

card warning will be displayed on the monitors. Type I and II CompactFlash cards and IBM

Microdrives are compatible with this camera. For memory card care and handling, see page 149.

Always turn off the camera and confirm the access

lamp is not lit before changing between power sup-

plies.

Always turn off the camera and confirm the access lamp is not lit before inserting or

removing a memory card, otherwise the card may be damaged, and data lost.