Digital Camera Instruction Manual Dimage A 200

ECORDING MENU

DSP (DIGITAL SUBJECT PROGRAM) SETUP

The memory registers used for camera settings can be

assigned to the Digital Subject Program positions on the

exposure-mode dial. This is set in section 3 of the recording

menu (p. 84). Two options are available:

DSP - the Digital Subject Programs are active on the

exposure-mode dial.

Memory recall - the memory register are assigned to the

Digital Subject Program positions as indicated in the

illustration.

For more about Digital Subject Programs, see page 58. To

save camera settings turn to page 98.

This function reduces the affect of dark noise caused by

long exposures. Noise reduction is applied to exposures of

1/2 second or longer. Processing is applied to each image

after it is captured. The monitor remains blank during

processing for a maximum of 30 seconds. Noise reduction

uses dark-frame subtraction. Noise reduction can be

applied when operating temperatures are high regardless

of the shutter speed. Noise reduction can be turned off in

section 3 of the recording menu.

NOISE REDUCTION

Memory

DSP set

Noise reductn

Monitor amp.

Off

Manual exp.

Digital zoom

Memory –

DSP set DSP

Noise reductn On

Monitor amp. Auto

Digital zoom

Interpolate

Manual exp. Exp. priority