Digital Camera Instruction Manual Dimage A 200

When a large amount of image data is captured in a short

period, the camera’s internal buffer memory becomes full; the

frame counter turns yellow on the monitors. Time must be given

for this data to be written to the memory card. Wait for the

indicator to turn white before capturing more images.

Camera Notes

Compose the picture as described in the basic

recording section (p. 30). Press and hold the shutter-

release button all the way down (1) to begin taking

pictures. The camera continues to record images

until the maximum number has been taken or the

shutter button is released.

The built-in flash can be used with standard and high-

speed continuous advance, but the rate of capture is

reduced because the flash must recharge between

frames.