User Guide
1 Introduction
4
1.2 Required Environment
The following network environment is required in order to use the Internet
fax and network scanning features.
Internet faxing
• Mail server (POP3 server and SMTP server)
Network scanning (Scan to E-mail)
• Mail server (SMTP server)
Network scanning (Scan to Server)
• FTP server (The enclosed Document Management Utility can be
used as a simple FTP server.)
• Mail server (SMTP server) in order to use mail notification
Common
• Ethernet 10/100Base-T
• TCP/IP protocol
1.3 Connecting to a Network (LAN)
In order to use the Internet fax and network scanning features, this machine
must be connected to a LAN and be able to communicate using the TCP/IP
protocol.
Use an Ethernet cable (for 10/100Base-T Ethernet) to connect to the LAN.
(The Ethernet cable is not included with the IF-102 (Internet Fax kit).)
IMPORTANT
• Be sure to use a Category 5, shielded cable for the 10/100Base-T
connection, otherwise there may be electronic interference.
IF-102.book Page 4 Friday, June 21, 2002 1:22 PM