User Guide

1 Introduction
11
Correcting text and input precautions
• To erase all entered text, press the
[NO]
key.
• To delete only part of the entered text, use the and keys to move
the cursor (_) to the character that you wish to delete, and then press
the
[Delete]
key (one-touch dial key [27]).
• To change an entered character, use the and keys to move the
cursor (_) to the character that you wish to change, and then enter the
new character. (The character at the cursor’s position is replaced with
the new character.)
• If the same one-touch dial key is needed to enter two characters in a
row, press the key after selecting the first character. (Refer to the
above example.)
• To enter a space, press one-touch dial key
[26]
.
IF-102.book Page 11 Friday, June 21, 2002 1:22 PM