User Guide

1 Introduction
14
1.6.2 Specifying Network Settings (“NETWORK(FAX/
SCAN)” Menu)
From the “
NETWORK(FAX/SCAN)
” menu of the INITIAL SET mode,
various network settings can be specified.
Tip
To set the “IP ADDRESS” function
1. Press the
[INITIAL SET]
key.
The first screen of the INITIAL SET
mode appears.
2. Using the and keys, select
“
NETWORK(FAX/SCAN)
”.
3. Press the
[1]
key from the 10-key pad
to select “
IP ADDRES
S”.
4. Using the and keys, select either
“
AUTO
” or “
SPECIFY
”, and then
press the
[YES]
key.
• If “
AUTO
” was selected so the IP
address will automatically be
assigned by the DHCP server, the
“
NETWORK(FAX/SCAN)
” menu
appears again.
• If “
SPECIFY
” was selected, a screen
appears, allowing you to specify the
IP address. (Continue with step 5.)
• If, at any time, you wish to quit setting a “NETWORK(FAX/SCAN)”
function, press the [NO] key. When the message “STOP SETTING?”
appears, press the [YES] key to quit.
IF-102.book Page 14 Friday, June 21, 2002 1:22 PM