User Guide

1 Introduction
16
To set the “GATEWAY” function
1. From the “
NETWORK(FAX/SCAN)
”
menu of the INITIAL SET mode,
press the
[3]
key from the 10-key pad
to select “
GATEWAY
”.
2. Using the 10-key pad, enter the IP
address of the gateway.
• The screen at the right shows an
example of an entered IP address.
For the appropriate setting, consult
the network administrator.
3. Press the
[ENTER]
key.
The “
NETWORK(FAX/SCAN)
” menu appears again.
To set the “DNS CONFIG.” function
1. From the “
NETWORK(FAX/SCAN)
”
menu of the INITIAL SET mode,
press the
[4]
key from the 10-key pad
to select “
DNS CONFIG.
”.
2. Using the and keys, select either
“
DISABLE
” or “
ENABLE
”, and then
press the
[YES]
key.
• If “
DISABLE
” was selected, the
“
NETWORK(FAX/SCAN)
” menu
appears again.
• If “
ENABLE
” was selected, a screen
appears, allowing you to specify the
IP address of the DNS server. (Con-
tinue with step 3.)
3. Using the 10-key pad, enter the IP
address of the DNS server.
4. Press the
[ENTER]
key.
The “
NETWORK(FAX/SCAN)
”
menu appears again.
IF-102.book Page 16 Friday, June 21, 2002 1:22 PM