User Guide

1 Introduction
17
To set the “SERVER TIMEOUT” function
1. From the “
NETWORK(FAX/SCAN)
”
menu of the INITIAL SET mode,
press the
[5]
key from the 10-key pad
to select “
SERVER TIMEOUT
”.
2. Using the 10-key pad, enter the time-
out period (seconds).
• The timeout period can be set
between 5 and 120 seconds.
3. Press the
[ENTER]
key.
The “
NETWORK(FAX/SCAN)
”
menu appears again.
1.6.3 Specifying E-mail Settings (“E-MAIL SETTING 1”
Menu)
From the “
E-MAIL SETTING 1
” and “
E-MAIL SETTING 2
” menus of the
INITIAL SET mode, various e-mail settings can be specified.
Tip
To program the sender’s name
1. Press the
[INITIAL SET]
key.
The first screen of the INITIAL
SET mode appears.
2. Using the and keys, select “
E-
MAIL SETTING 1
”.
• If, at any time, you wish to quit setting an “E-MAIL SETTING 1” or “E-
MAIL SETTING 2” function, press the [NO] key. When the message
“STOP SETTING?” appears, press the [YES] key to quit.
IF-102.book Page 17 Friday, June 21, 2002 1:22 PM