User Guide

1 Introduction
21
1.6.4 Specifying E-mail Settings (“E-MAIL SETTING 2” Menu)
To set the POP3 server address
1. Press the
[INITIAL SET]
key.
The first screen of the INITIAL
SET mode appears.
2. Using the and keys, select “
E-
MAIL SETTING 2
”.
3. Press the
[1]
key from the 10-key pad
to select “
POP3 SERVER
”.
4. Enter the IP address or host name for
the POP3 server.
• For details on entering text, refer to
“1.5 Entering Text” (p. 9).
• The host name can contain a maxi-
mum of 64 characters.
• The upper-right screen shows an
example of an entered IP address.
For the appropriate setting, consult
the network administrator.
5. Press the
[ENTER]
key.
The “
E-MAIL SETTING 2
” menu
appears again.
IF-102.book Page 21 Friday, June 21, 2002 1:22 PM