User Guide

1 Introduction
22
To set the “POP3 ACCOUNT” function
1. From the “
E-MAIL SETTING 2
” menu
of the INITIAL SET mode, press the
[2]
key from the 10-key pad to select
“
POP3 ACCOUNT
”.
2. Enter the account name.
• For details on entering text, refer to
“1.5 Entering Text” (p. 9).
• The account name can contain a
maximum of 64 characters.
3. Press the
[ENTER]
key.
The “
E-MAIL SETTING 2
” menu
appears again.
To set the “POP3 PASSWORD” function
1. From the “
E-MAIL SETTING 2
” menu
of the INITIAL SET mode, press the
[3]
key from the 10-key pad to select
“
POP3 PASSWORD
”.
2. Enter the password.
• For details on entering text, refer to
“1.5 Entering Text” (p. 9).
• The password can contain a maxi-
mum of 32 characters.
• The upper-right screen shows an
example of an entered password. For
the appropriate setting, consult the
network administrator.
3. Press the
[YES]
key.
The “
E-MAIL SETTING 2
” menu appears again.
IF-102.book Page 22 Friday, June 21, 2002 1:22 PM