User Guide

1 Introduction
23
To set the “AUTO RECEPTION” function
1. From the “
E-MAIL SETTING 2
” menu
of the INITIAL SET mode, press the
[4]
key from the 10-key pad to select
“
AUTO RECEPTION
”.
2. Using the and keys, select either
“
ON
” or “
OFF
”, and then press the
[YES]
key.
• If “
ON
” was selected, a screen
appears, allowing you to specify the
time interval for checking for new e-
mail. (Continue with step 3.)
• If “
OFF
” was selected, the “
E-MAIL
SETTING 2
” menu appears again.
3. Using the 10-key pad, enter the time
interval (minutes) for checking for
new e-mail.
• The time interval for automatically
checking for new e-mail can be set
between 1 and 60 seconds.
4. Press the
[ENTER]
key.
The “
E-MAIL SETTING 2
” menu
appears again.
IF-102.book Page 23 Friday, June 21, 2002 1:22 PM