User Guide
1 Introduction
24
To set the address where results are sent
1. From the “
E-MAIL SETTING 2
” menu
of the INITIAL SET mode, press the
[5]
key from the 10-key pad to select
“
REPLY ADDRESS
”.
2. Enter the e-mail address for the recipi-
ent of error notifications.
• For details on entering text, refer to
“1.5 Entering Text” (p. 9).
• The e-mail address can contain a
maximum of 64 characters.
• Normally, enter the e-mail address
of the administrator.
3. Press the
[ENTER]
key.
The “
E-MAIL SETTING 2
” menu
appears again.
To set the “HEADER PRINT” function
1. From the “
E-MAIL SETTING 2
” menu
of the INITIAL SET mode, press the
[6]
key from the 10-key pad to select
“
HEADER PRINT
”.
2. Using the and keys, select either
“
ON
” or “
OFF
”, and then press the
[YES]
key.
The “
E-MAIL SETTING 2
” menu
appears again.
IF-102.book Page 24 Friday, June 21, 2002 1:22 PM