User Guide

2 Internet Faxing
26
2.1.1 Using the Automatic Document Feeder
1. Press the
[FAX]
key.
The machine enters Fax mode, and
the fax screen appears.
2. Load the document to be sent into the
Automatic Document Feeder.
• Adjust the Document Guide Plates
to fit the size of the document.
• Load the document with the side to
be scanned facing up.
3. If necessary, change the “
Resolution
”
setting (p. 29).
4. Press the
[MAIL]
key.
The
[MAIL]
key lights up, and an e-
mail address can be entered.
5. Enter the e-mail address of the recipi-
ent.
• For details on entering text, refer to
“1.5 Entering Text” (p. 9).
• The e-mail address of a previously programmed recipient can also be
specified. Refer to “2.2.2 Specifying the Recipient” (p. 30).
6. Press the
[START]
key to begin scanning and sending the fax.
• Once transmission is finished, a beep is sounded.
IF-102.book Page 26 Friday, June 21, 2002 1:22 PM