User Guide

2 Internet Faxing
28
5. Press the
[MAIL]
key.
The
[MAIL]
key lights up, and an e-
mail address can be entered.
6. Enter the e-mail address of the recipi-
ent.
• For details on entering text, refer to
“1.5 Entering Text” (p. 9).
• The e-mail address of a previously programmed recipient can also be
specified. Refer to “2.2.2 Specifying the Recipient” (p. 30).
7. Check that the correct document size
appears in the screen.
• To change the document size, press
the key, and then use the and
keys to select the desired docu-
ment size in the screen that appears.
8. Press the
[ENTER]
key to scan the page.
9. If the document to be faxed contains
multiple pages, position the next page
of the document on the Original Glass
when the screen shown at the right
appears, and then press the
[YES]
key.
• Repeat step 9 until all pages of the document have been scanned.
10. Press the
[START]
key to begin scanning and sending the fax.
• Once transmission is finished, a beep is sounded.
If the memory becomes full while scanning documents
If the memory becomes full while a document is being scanned, the
transmission is cancelled.
IF-102.book Page 28 Friday, June 21, 2002 1:22 PM