User Guide

2 Internet Faxing
37
Tip
6. Press the
[START]
key.
A message appears, allowing you to select whether or not to check the
recipients.
7. To check the recipients, press the
[ENTER]
key.
• If you do not wish to check the
recipients, skip to step 9.
8. The recipients specified in step 5 are
displayed in the order that they were
selected.
Check the recipient, and then press the
[YES]
key.
• To delete the displayed recipient,
press the
[NO]
key.
• After all recipients have been
checked, “
Fin. =START
” appears in
the display.
9. Press the
[START]
key to begin scanning and sending the fax.
Note
• If the e-mail address is entered directly, press the [MAIL] key after
entering the address. (For details on entering text, refer to “1.5
Entering Text” (p. 9).)
• If the wrong recipient has been specified, press the [NO] key to
delete the current selection. (This is valid only before the recipient
is set by pressing the [YES] key.)
• If both e-mail addresses and fax numbers are specified as
recipients for broadcast transmission, the faxing begins after the e-
mails are sent.
IF-102.book Page 37 Friday, June 21, 2002 1:22 PM